138-088-0001

Technical Characteristics

• Mounting Method

  clamp ring

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 all sections

• Terminal Location

  radially positioned over less than half the circumference

• Tap Location Tolerance Per Section

  -2.0/+0.0 deg angular rotation all sections

• Terminal Type And Quantity

  8 turret

• Features Provided

  humidity proof

• Shaft End Play

  0.0035 inches

• Shaft Diameter

  0.1248 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  95.0 all sections

• Resistance Tolerance Per Section In Percent

  -3.000/+3.000 all sections

• Shaft Runout

  0.002 inches

• Undercut Diameter

  0.9688 inches maximum

• Overall Length

  1.856 inches maximum

• Power Dissipation Rating Per Section In Watts

  0.75 free air all sections

• Effective Electrical Rotation In Deg Angular Rotation

  350.0 nominal

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round

• Body Length

  1.200 inches maximum

• Fixed Tap Quantity Per Section

  1 all sections

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Overall Diameter

  1.278 inches maximum

• Electrical Resistance Per Section

  146.0 kilohms all sections

• Maximum Starting Torque

  0.30 inch-ounces

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Maximum Running Torque

  0.25 inch-ounces

• Pilot Length

  0.0620 inches nominal

• Undercut Width

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  continuous motion

• Standard Taper Curve Per Section

  a all sections

• Fragility Factor

  moderately rugged

• Shaft Length

  0.656 inches nominal

• Section Quantity

  2

• Shaft Bearing Type

  ball

• Body Diameter

  1.062 inches maximum

• Test Data Document

  95542-138-088 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Lip Depth

  0.0620 inches nominal

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  8.0 all sections

• Mounting Lip Diameter

  1.0620 inches maximum

• Pilot Diameter

  0.9688 inches maximum