MD09-10-2686

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Shaft End Play

  0.005 inches

• Terminal Location

  longitudinally positioned on the circumference

• Function Conformity Tolerance Per Section

  -0.10/+0.10 single section

• Maximum Stop Torque

  200.00 inch-ounces

• Pilot Diameter

  0.7497 inches minimum and 0.7500 inches maximum

• Test Data Document

  06481-900056 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Electrical Resistance Per Section

  25.0 percent, rated amperes c and better flooring

• Function Conformity Per Section

  single section independent linearity

• Shaft Bearing Type

  bearing

• Effective Electrical Rotation In Deg Angular Rotation

  710.0 minimum and 1000.0 maximum

• Maximum Starting Torque

  0.20 inch-ounces

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Body Length

  1.376 inches maximum

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Fixed Tap Quantity Per Section

  1 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  1800.0 single section

• Body Diameter

  0.880 nominal centimeters

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Terminal Type And Quantity

  4 solder stud

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Shaft Length

  0.828 inches minimum and 0.858 inches maximum

• Tap Location Tolerance Per Section

  -1.0/+1.0 deg angular rotation single section

• Maximum Running Torque

  0.30 inch-ounces

• Mounting Method

  clamp ring

• Rotary Actuator Travel In Angular Deg

  710.0 minimum and 1000.0 maximum

• Mounting Lip Depth

  0.0570 nominal mils and 0.0670 nominal centimeters

• Mounting Lip Diameter

  0.8700 inches minimum and 0.8800 inches maximum

• Shaft Runout

  0.001 inches

• Features Provided

  humidity proof

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Cubic Measure

  0.836 cubic inches

• Function Characteristic Per Section

  7 oclock all primaries

• Power Dissipation Rating Per Section In Watts

  1.5 7th secondary quality

• Undercut Diameter

  0.750 inches nominal

• Undercut Width

  0.0570 inches minimum

• Section Quantity

  1

• Shaft Diameter

  0.1246 inches minimum and 0.1248 inches maximum