00C2

Technical Characteristics

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.120 minimum at 200 pct all locations and 0.550 maximum at 200 pct

• Nominal Thread Size

  0.375 inches

• Actuator Position Designation

  at pole two

• Actuator Function

  trip-reset

• Main Contact Tripping Mechanism Type

  trip free

• Reset Method

  manual

• Ultimate Trip Time Per Pole In Seconds

  0.850 minimum all locations and 5.000 maximum

• Trip Release Characteristic

  time delay all locations

• Circuit Protection Type

  overcurrent all locations

• Maximum Continuous Load Current Rating Per Pole

  20.0 amperes ac all locations and 20.0 amperes dc

• Arc Quenching Method

  magnetic blowout

• Pole Quantity

  3

• Fragility Factor

  moderately rugged

• Center To Center Distance Between Terminals Parallel To Length

  0.865 inches minimum and 0.885 inches maximum

• Body Width

  1.844 inches minimum and 1.906 inches maximum

• Body Style

  1b multipole-single actuator type

• Terminal Type And Quantity

  4 wire hook

• Thread Series Designator

  unef

• Frequency In Hertz

  400.0 all locations

• Inclosure Protection Type For Which Designed

  fungus resistant and hermetically sealed

• Internal Trip Release Configuration

  series trip all locations

• Manual Actuator Type And Quantity

  1 toggle

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  125.0 all locations

• Trip Release Method

  magnetic all locations

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  300.0 ac all locations and 750.0 dc

• Operating Voltage Type And Rating Per Pole In Volts

  250.0 ac all locations and 50.0 dc

• Thread Quantity Per Inch

  32

• Storage Type

  general purpose warehouse

• Mounting Facility Type And Quantity

  1 threaded bushing w/panel seal

• Mounting Surface To Terminal End Distance

  1.690 inches minimum and 1.710 inches maximum

• Center To Center Distance Between Terminals Parallel To Width

  0.615 inches minimum and 0.635 inches maximum

• Case Material

  metal

• Body Length

  1.552 inches minimum and 1.572 inches maximum

• Bushing Length

  0.365 inches minimum and 0.385 inches maximum