61690

Technical Characteristics

• Test Data Document

  03538-7648736 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mechanical Backlash In Deg Angular Rotation

  0.041

• Function Conformity Tolerance Per Section

  -0.05/+0.05 1st section

• Pilot Diameter

  1.31150 inches minimum and 1.31200 inches maximum

• Maximum Starting Torque

  0.70 inch-ounces

• Mounting Lip Depth

  0.08800 inches minimum and 0.09800 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  350.0 nominal

• Shaft Style

  round

• Body Length

  1.800 inches maximum

• Function Conformity Tolerance Per Section

  -0.10/+0.10 2nd section

• Body Style

  cylindrical servo mounted

• Pilot Diameter Runout

  0.00100 inches

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Shaft Length

  0.734 inches minimum and 0.766 inches maximum

• Overall Diameter

  1.709 inches nominal

• Shaft Diameter

  0.125 inches nominal

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Function Conformity Per Section

  all sections independent linearity

• Lateral Runout

  0.002 inches

• Body Diameter

  1.453 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 2nd section

• Undercut Diameter

  1.315 inches maximum

• Actuator Travel Control Feature

  continuous motion

• Undercut Width

  0.07300 inches minimum

• Mounting Method

  clamp ring

• Shaft Runout

  0.001 inches

• Terminal Type And Quantity

  8 turret

• Overall Length

  2.566 inches maximum

• Terminal Location

  radially positioned over more than half the circumference

• Electrical Resistance Per Section

  5.0 kilohms all sections

• Power Dissipation Rating Per Section In Watts

  2.0 free air all sections

• Function Characteristic Per Section

  all sections equation

• Section Quantity

  2

• Shaft Bearing Type

  ball

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 1st section

• Mounting Lip Diameter

  1.43200 inches minimum and 1.44200 inches maximum

• Pilot Length

  0.12700 inches minimum and 0.13700 inches maximum