EP13M3
Capacitors
CAPACITOR,FIXED,METALLIZED,PAPER-PLASTIC DIELECTRIC
EP13M3
CAPACITOR,FIXED,METALLIZED,PAPER-PLASTIC DIELECTRIC
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Terminal Surface Treatment
solder
-
Overall Length
0.687 inches minimum and 0.813 inches maximum
-
Case Material
plastic
-
Terminal Diameter
0.025 inches nominal
-
Dissipation Factor At Reference Temp In Percent
1.000
-
Body Width
0.062 inches minimum and 0.188 inches maximum
-
Terminal Type And Quantity
2 uninsulated wire lead
-
Test Data Document
11871-5602-280-3 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
-
Dielectric Material
plastic polyethylene terephthalate
-
Terminal Length
1.625 inches minimum and 2.625 inches maximum
-
Power Factor At Reference Temp In Percent
1.500
-
Overall Width
0.062 inches minimum and 0.188 inches maximum
-
Body Height
0.156 inches minimum and 0.282 inches maximum
-
Schematic Diagram Designator
no common or grounded electrode(s)
-
Nonderated Continuous Voltage Rating And Type Per Section
200.0 dc single section
-
Body Length
0.687 inches minimum and 0.813 inches maximum
-
Insulation Resistance At Reference Temp
100000.0 megohm-microfarads
-
Overall Height
0.156 inches minimum and 0.282 inches maximum
-
Capacitance Value Per Section
0.100 microfarads single section
-
Nonderated Operating Temp
-55.0 deg celsius minimum and 125.0 deg celsius maximum
-
Tolerance Range Per Section
-20.00/+20.00 percent single section
-
Body Style
w/o mtg facilities, terminals on opposite surfaces
-
Reliability Indicator
not established