M2WF12A

Technical Characteristics

• Terminal Surface Treatment

  solder

• Overall Length

  0.687 inches minimum and 0.813 inches maximum

• Case Material

  plastic

• Terminal Diameter

  0.025 inches nominal

• Dissipation Factor At Reference Temp In Percent

  1.000

• Body Width

  0.062 inches minimum and 0.188 inches maximum

• Terminal Type And Quantity

  2 uninsulated wire lead

• Test Data Document

  11871-5602-280-3 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Dielectric Material

  plastic polyethylene terephthalate

• Terminal Length

  1.625 inches minimum and 2.625 inches maximum

• Power Factor At Reference Temp In Percent

  1.500

• Overall Width

  0.062 inches minimum and 0.188 inches maximum

• Body Height

  0.156 inches minimum and 0.282 inches maximum

• Schematic Diagram Designator

  no common or grounded electrode(s)

• Nonderated Continuous Voltage Rating And Type Per Section

  200.0 dc single section

• Body Length

  0.687 inches minimum and 0.813 inches maximum

• Insulation Resistance At Reference Temp

  100000.0 megohm-microfarads

• Overall Height

  0.156 inches minimum and 0.282 inches maximum

• Capacitance Value Per Section

  0.100 microfarads single section

• Nonderated Operating Temp

  -55.0 deg celsius minimum and 125.0 deg celsius maximum

• Tolerance Range Per Section

  -20.00/+20.00 percent single section

• Body Style

  w/o mtg facilities, terminals on opposite surfaces

• Reliability Indicator

  not established