6203-2K2KP0RM1PCT

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Section Quantity

  2

• Power Dissipation Rating Per Section In Watts

  5.0 free air all sections

• Function Conformity Per Section

  single section independent linearity

• Actuator Type

  dual concentric

• Electrical Resistance Per Section

  2.0 kilohms all sections

• Effective Electrical Rotation In Deg Angular Rotation

  345.0 minimum and 355.0 maximum

• Undercut Width

  0.0570 inches minimum and 0.0670 inches maximum

• Rotary Actuator Travel In Angular Deg

  345.0 minimum

• Overall Length

  2.135 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 all sections

• Body Style

  cylindrical servo mounted

• Overall Diameter

  1.203 inches maximum

• Mounting Lip Diameter

  0.9683 inches minimum and 0.9688 inches maximum

• Shaft Radial Play

  0.002 inches

• Shaft Diameter

  0.125 inches nominal

• Reliability Indicator

  not established

• Shaft Length

  0.984 inches minimum and 1.016 inches maximum

• Contact Arm Electrical Off Position

  fully ccw

• Function Characteristic Per Section

  single section linear

• Undercut Diameter

  0.9683 inches minimum and 0.9688 inches maximum

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Pilot Diameter

  0.9683 inches minimum and 0.9688 inches maximum

• Shaft Runout

  0.001 inches

• Terminal Type And Quantity

  6 solder stud

• Body Length

  1.135 inches maximum

• Body Diameter

  1.057 inches minimum and 1.067 inches maximum

• Terminal Location

  radially positioned over less than half the circumference

• Maximum Starting Torque

  0.40 inch-ounces

• First Flat Length

  0.234 inches minimum and 0.266 inches maximum

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Mounting Method

  clamp ring

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Shaft Style

  round, flatted

• Function Conformity Tolerance Per Section

  -0.50/+0.50 single section

• Flat Height

  0.067 inches minimum and 0.109 inches maximum