224S1-150

Technical Characteristics

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Body Height

  0.437 inches minimum and 0.469 inches maximum

• Terminal Location

  rear end

• Screw Thread Series Designator

  unf

• Body Style

  rectangular w/mounting holes/slots

• Shaft Style

  round, slotted

• Body Length

  1.328 inches minimum and 1.360 inches maximum

• Screw Thread Diameter

  0.190 inches nominal

• Mounting Method

  standard bushing and unthreaded hole

• Lateral Distance Between Mounting Hole Centers

  0.095 inches minimum and 1.005 inches maximum

• Mounting Hole Diameter

  0.226 inches minimum and 0.231 inches maximum

• Body Width

  0.375 inches maximum

• Electrical Resistance Per Section

  15.0 ohms single section

• Shaft Diameter

  0.125 inches nominal

• Terminal Type And Quantity

  3 solder stud

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Overall Length

  1.344 inches minimum and 1.662 inches maximum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -100.0/+100.0 single section

• Overall Height

  0.437 inches minimum and 0.469 inches maximum

• Mounting Facility Quantity

  2

• Shaft Length

  0.306 inches minimum and 0.328 inches maximum

• Standard Taper Curve Per Section

  a single section

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  175.0 single section

• Test Data Document

  90536-4912695 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Overall Width

  0.375 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1

• Screw Thread Quantity Per Inch

  32.0