552-0119

Technical Characteristics

• Function Characteristic Per Section

  single section linear

• Maximum Starting Torque

  0.50 inch-ounces

• Terminal Location

  radially positioned over less than half the circumference

• Flat Height

  0.122 inches minimum and 0.127 inches maximum

• Pilot Diameter

  0.6245 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  105.0 single section

• Mounting Method

  clamp ring

• Mounting Hole/Stud Circle Diameter

  0.625 inches nominal

• Angle Of Mounting Hole In Deg

  90.0

• Shaft Style

  round, flatted

• Reliability Indicator

  not established

• Actuator Type

  single shaft

• Pilot Length

  0.0620 inches nominal

• Terminal Type And Quantity

  3 solder stud

• Lateral Runout

  0.002 inches

• Pilot Diameter Runout

  0.002 inches

• Undercut Diameter

  0.625 inches maximum

• Shaft Radial Play

  0.002 inches

• Actuator Travel Control Feature

  clutch

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section

• Body Style

  cylindrical servo mounted

• Shaft Diameter

  0.250 inches nominal

• Angle Between Centerlines Of Mounting Holes In Deg

  66.0

• Body Length

  1.065 inches minimum and 1.085 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  35.0 single section

• Shaft Bearing Type

  roller

• Mounting Lip Depth

  0.0620 inches nominal

• Mounting Lip Diameter

  0.8750 inches nominal

• Function Conformity Per Section

  single section independent linearity

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Rotary Actuator Travel In Angular Deg

  1080.0 nominal

• Effective Electrical Rotation In Deg Angular Rotation

  1080.0 nominal

• Electrical Resistance Per Section

  5.0 kilohms single section

• Shaft Runout

  0.002 inches

• Section Quantity

  1

• Maximum Running Torque

  0.50 inch-ounces

• Overall Diameter

  1.047 inches nominal

• Shaft Length

  0.312 inches nominal

• Body Diameter

  0.875 inches nominal

• Undercut Width

  0.0680 inches nominal

• Function Conformity Tolerance Per Section

  -0.10/+0.10 single section

• First Flat Length

  0.125 inches minimum and 0.250 inches maximum

• Power Dissipation Rating Per Section In Watts

  1.5 free air single section

• Shaft End Play

  0.005 inches