1141642-2

Technical Characteristics

• Test Data Document

  23667-1141642-2 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type

• ~1

  data on certain environmental and performance

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Mounting Facility Quantity

  2

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.290 inches minimum and 0.310 inches maximum

• Standard Taper Curve Per Section

  a single section

• Mounting Hole Diameter

  0.088 inches minimum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Shaft Diameter

  0.109 inches minimum and 0.141 inches maximum

• Mounting Method

  unthreaded hole

• Terminal Type And Quantity

  3 pin

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  175.0 single section

• Body Height

  0.296 inches minimum and 0.328 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1

• Overall Height

  0.780 inches minimum and 0.844 inches maximum

• Actuator Travel Control Feature

  stops

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Overall Length

  1.280 inches minimum and 1.344 inches maximum

• Contact Arm Electrical Off Position

  fully cw

• Body Style

  rectangular w/mounting holes/slots

• Shaft Style

  round, slotted

• Maximum Starting Torque

  5.00 inch-ounces

• Center To Center Distance Between Terminals

  0.690 inches minimum and 0.710 inches maximum

• Features Provided

  nonmetallic shaft

• Rotary Actuator Travel In Angular Deg

  9000.0 nominal

• Shaft Length

  0.046 inches minimum and 0.078 inches maximum

• Terminal Location

  lower adjacent side single row

• Terminal Length

  0.484 inches minimum and 0.516 inches maximum

• Electrical Resistance Per Section

  500.0 ohms single section

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Body Width

  0.270 inches minimum and 0.290 inches maximum

• Overall Width

  0.270 inches minimum and 0.290 inches maximum

• Lateral Distance Between Mounting Hole Centers

  0.995 inches minimum and 1.005 inches maximum

• Body Length

  1.234 inches minimum and 1.266 inches maximum