245050-F5C

Technical Characteristics

• Thread Class

  2a single mounting facility

• Flat Height

  0.210 inches nominal single actuator

• Shaft Diameter

  0.250 inches nominal single actuator

• Shaft Length

  0.880 inches nominal single actuator

• Overall Diameter

  1.400 inches nominal

• Nonturn Device Type

  tab at 3:00 o'clock

• Switch Contact Basic Design

  nonpile-up nonsymmetrical

• Shaft Flat/Slot Angular Location

  240.0 degrees from nonturn device single actuator

• Switch Actuator Indexing Position Quantity

  7 single actuator

• Terminal Type

  tab, solder lug

• Switch Actuator Stop Device Type

  fixed stop single actuator

• Contact Load Current Rating

  1.0 amperes resistive load ac at sea level

• Contact Load Current Rating

  500.0 milliamperes resistive load dc at altitude

• ~1

  lation stop between positions a and b,the shaft must be pushed in to engage with

• ~2

  position b going in a clockwise direction,and rotating counterclockwise,the sha

• Thread Length

  0.440 inches nominal single mounting facility

• Overall Length

  3.500 inches nominal

• First Flat Length

  0.250 inches nominal single actuator

• Nonturn Device Radius

  0.531 inches nominal at 3:00 o'clock

• Individual Section Quantity

  5

• Operating Temp Range

  -55.0/+105.0 deg celsius

• Mounting Method

  threaded bushing single mounting facility

• Nominal Thread Size

  0.375 inches single mounting facility

• Contact Voltage Rating In Volts

  115.0

• Contact Voltage Rating In Volts

  28.0

• Shaft Type

  round, flatted single actuator

• Switch Actuator Positioning Increment

  30.0 degrees single actuator

• Contact Load Current Rating

  2.0 amperes resistive load dc at sea level

• ~3

  ft must be pushed in to engage with position a,deck 1,shorting and bridging,deck

• ~4

  2-5 nonshorting

• Special Features

  to engage isolated positions,the shaft must be pushed in 0.070 in. to rotate,iso

• Style Designator

  4a circular wafer, bushing mount

• Thread Series Designator

  unef single mounting facility