G3@0117S1

Technical Characteristics

• Function Conformity Tolerance Per Section

  -0.30/+0.30 single section

• Shaft Style

  round

• Terminal Type And Quantity

  3 tab, solder lug

• Maximum Stop Torque

  48.00 inch-ounces

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section

• Mounting Bushing Length

  0.296 inches minimum and 0.328 inches maximum

• Shaft Diameter

  0.122 inches minimum and 0.128 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Shaft Radial Play

  0.002 inches

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Mounting Method

  standard bushing

• Standard Taper Curve Per Section

  a single section

• Terminal Location

  radially positioned over less than half the circumference

• Function Characteristic Per Section

  single section linear

• Screw Thread Diameter

  0.250 inches nominal

• Maximum Starting Torque

  0.60 inch-ounces

• Shaft Length

  0.265 inches minimum and 0.359 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Body Diameter

  0.859 inches minimum and 0.891 inches maximum

• Section Quantity

  1

• Shaft Runout

  0.002 inches

• Screw Thread Quantity Per Inch

  32.0

• Contact Arm Electrical Off Position

  fully ccw-cw

• Actuator Travel Control Feature

  stops

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Effective Electrical Rotation In Deg Angular Rotation

  1080.0 minimum and 1090.0 maximum

• Maximum Running Torque

  0.60 inch-ounces

• Rotary Actuator Travel In Angular Deg

  1080.0 minimum and 1090.0 maximum

• Body Style

  cylindrical bushing mounted

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Function Conformity Per Section

  single section independent linearity

• Body Length

  0.547 inches minimum and 0.551 inches maximum

• Overall Diameter

  1.031 inches minimum and 1.095 inches maximum

• Electrical Resistance Per Section

  1.0 kilohms single section

• Overall Length

  1.201 inches minimum and 1.273 inches maximum

• Shaft End Play

  0.0005 inches