102-500-1

Technical Characteristics

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Body Diameter

  1.995 inches minimum and 2.005 inches maximum

• Shaft Length

  0.125 inches nominal

• Maximum Starting Torque

  4.20 inch-ounces (ounce-inches)

• Maximum Running Torque

  4.20 inch-ounces (ounce-inches)

• Lateral Runout

  0.001 inches

• Pilot Diameter Runout

  0.001 inches

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Method

  clamp ring

• Electrical Resistance Per Section

  20.0 kilohms 3rd section

• Electrical Resistance Per Section

  50.0 kilohms 1st section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 all sections

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  m20.0/p20.0 all sections

• Power Dissipation Rating Per Section In Watts

  4.0 free air all sections

• Resistance Tolerance Per Section In Percent

  m1.0/p1.0 all sections

• Actuator Travel Control Feature

  continuous motion

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Section Quantity

  6

• Terminal Type And Quantity

  18 tab,solder lug

• Standard Taper Curve Per Section

  a single section

• Electrical Resistance Per Section

  20.0 kilohms 6th section

• Electrical Resistance Per Section

  20.0 kilohms 5th section

• Electrical Resistance Per Section

  20.0 kilohms 4th section

• Electrical Resistance Per Section

  20.0 kilohms 2nd section

• Shaft Radial Play

  0.002 inches

• Shaft Runout

  0.001 inches

• Effective Electrical Rotation In Deg Angular Rotation

  340.0 nominal

• Actuator Type

  double ended shaft

• Shaft Bearing Type

  bearing

• Mounting Lip Depth

  0.0880 inches minimum and 0.0980 inches maximum

• Mounting Lip Diameter

  1.9950 inches minimum and 2.0050 inches maximum

• Body Length

  3.412 inches maximum

• Shaft Diameter

  0.250 inches nominal

• Undercut Width

  0.0730 inches minimum and 0.0830 inches maximum

• Undercut Diameter

  1.870 inches minimum and 1.875 inches maximum

• Pilot Diameter

  1.8700 inches minimum and 1.8750 inches maximum

• Reliability Indicator

  not established