2207370G1

Technical Characteristics

• Flat Height

  0.218 inches minimum single actuator and 0.223 inches maximum single actuator

• Individual Section Quantity

  2

• Operating Temp Range

  -25.0/+85.0 deg celsius

• Shaft Diameter

  0.250 inches nominal single actuator

• Test Data Document

  90348-2207370g1 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Shaft Length

  0.984 inches minimum single actuator and 1.016 inches maximum single actuator

• Pole Quantity

  1 each section rear

• Style Designator

  circular wafer, bushing mount

• First Flat Length

  0.433 inches minimum single actuator and 0.443 inches maximum single actuator

• Throw Quantity

  18 each section rear

• Overall Height

  2.307 inches minimum and 2.317 inches maximum

• Nonturn Device Type

  tab at 10:00 o'clock

• Switch Actuator Positioning Increment

  15.0 degrees single actuator

• Switch Actuator Stop Device Type

  fixed stop-breakoff tab single actuator

• Contact Switching Action

  makes before breaks each section rear

• Err Default

  err default and err default

• Overall Length

  2.968 inches minimum and 3.016 inches maximum

• Contact Load Current Rating

  5.0 amperes resistive load dc at sea level

• Nominal Thread Size

  0.375 inches single mounting facility

• Shaft Type

  round, flatted single actuator

• Mounting Method

  threaded bushing single mounting facility

• Switch Actuator Indexing Position Quantity

  18 single actuator

• Thread Class

  2a single mounting facility

• Overall Width

  1.964 inches minimum and 1.974 inches maximum

• Terminal Type

  tab, solder lug

• Switch Contact Basic Design

  nonpile-up symmetrical

• Thread Series Designator

  unef single mounting facility

• Contact Voltage Rating In Volts

  20.0 dc at sea level

• Nonturn Device Radius

  0.526 inches minimum at 10:00 o'clock and 0.536 inches maximum at 10:00 o'clock

• Detent Rotational Torque Range

  +1.500/+6.000 inch-pounds single actuator

• Shaft Flat/Slot Angular Location

  105.0 degrees from nonturn device single actuator