70-132-19MG6

Technical Characteristics

• Terminal Type And Quantity

  2 threaded stud

• Case Material

  plastic

• Switch Location And Position Designation

  internal at pole one

• Mounting Surface To Terminal End Distance

  2.456 inches minimum and 2.486 inches maximum

• Auxiliary Switch Function And Quantity

  1 alarm

• Body Width

  0.735 inches minimum and 0.765 inches maximum

• Body Style

  single pole type

• Frequency In Hertz

  400.0 single location

• Arc Quenching Method

  magnetic blowout

• Boss Height

  0.125 inches minimum and 0.155 inches maximum

• Main Contact Tripping Mechanism Type

  trip free

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  125.0 single location

• Unpackaged Unit Weight

  0.312 pounds

• Trip Release Characteristic

  time delay single location

• Maximum Continuous Load Current Rating Per Pole

  500.0 milliamperes ac single location

• Body Length

  2.485 inches minimum and 2.515 inches maximum

• Nominal Thread Size

  0.138 inches

• Internal Trip Release Configuration

  series trip single location

• Manual Actuator Type And Quantity

  1 toggle

• Inclosure Protection Type For Which Designed

  shock resistant and vibration resistant and moisture resistant and salt spray proof

• Pole Quantity

  1

• Switch Voltage Rating And Type In Volts

  115.0 ac and 50.0 dc

• Test Data Document

  05869-711570 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Switch Contact Arrangement

  single pole, double throw

• Operating Voltage Type And Rating Per Pole In Volts

  250.0 ac single location

• Trip Delay Time In Seconds Per Rated Continuous Current

  3.000 minimum at 200 pct single location and 10.000 maximum at 200 pct single location

• Circuit Protection Type

  overcurrent single location

• Thread Quantity Per Inch

  32

• Mounting Facility Type And Quantity

  2 threaded hole

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  2.047 inches minimum and 2.077 inches maximum

• Actuator Function

  trip-reset

• Switch Current Rating And Type In Amps

  5.0 ac and 1.0 dc

• Storage Type

  general purpose warehouse

• Actuator Position Designation

  at pole one

• Reset Method

  manual

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  1000.0 ac single location

• Thread Series Designator

  unc

• Center To Center Distance Between Terminals Parallel To Length

  1.925 inches minimum and 1.955 inches maximum

• Special Handling Feature

  magnetic

• Switch Terminal Type

  tab, solder lug

• Trip Release Method

  magnetic single location

• Fragility Factor

  moderately rugged