53-141-1MG3

Technical Characteristics

• Test Data Document

  12436-a15136 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Nominal Thread Size

  0.138 inches

• Frequency In Hertz

  60.0 all locations

• Terminal Type And Quantity

  7 threaded stud

• Ultimate Trip Time Per Pole In Seconds

  0.800 minimum all locations and 3.000 maximum all locations

• Main Contact Tripping Mechanism Type

  trip free

• Arc Quenching Method

  magnetic blowout

• Maximum Continuous Load Current Rating Per Pole

  60.0 amperes ac all locations

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  2.740 inches minimum and 2.760 inches maximum

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

  1.021 inches minimum and 1.041 inches maximum

• Operating Voltage Type And Rating Per Pole In Volts

  250.0 ac all locations

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.300 minimum at 200 pct all locations and 1.000 maximum at 200 pct all locations

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  2000.0 ac all locations

• Boss Height

  0.146 inches minimum and 0.166 inches maximum

• Manual Actuator Type And Quantity

  3 toggle

• Center To Center Distance Between Terminals Parallel To Width

  1.021 inches minimum and 1.041 inches maximum

• Case Material

  plastic

• Fragility Factor

  moderately rugged

• Special Handling Feature

  magnetic

• Pole Quantity

  3

• Circuit Protection Type

  overcurrent all locations

• Inclosure Protection Type For Which Designed

  fungus resistant and general purpose and moisture resistant

• Thread Series Designator

  unc

• Actuator Position Designation

  at each pole

• Reset Method

  manual

• Mounting Surface To Terminal End Distance

  3.239 inches nominal

• Internal Trip Release Configuration

  relay trip third location

• Storage Type

  general purpose warehouse

• Actuator Function

  trip-reset

• External Actuator Linkage Arrangement

  one, two, and three linked

• Center To Center Distance Between Terminals Parallel To Length

  3.053 inches minimum and 3.073 inches maximum

• Trip Release Characteristic

  instantaneous all locations and time delay all locations

• Thread Quantity Per Inch

  32

• Trip Release Method

  magnetic-hydraulic all locations

• Body Style

  multipole-multiple actuator type

• Body Length

  3.709 inches minimum and 3.042 inches minimum and 3.062 inches maximum

• Internal Trip Release Configuration

  series trip first location

• Mounting Facility Type And Quantity

  6 threaded hole

• Internal Trip Release Configuration

  series trip second location

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  150.0 all locations