3010L1-502

Technical Characteristics

• Body Width

  0.270 inches minimum and 0.290 inches maximum

• Electrical Resistance Per Section

  5.000 percent, rated amperes c and better flooring

• Overall Width

  0.270 inches minimum and 0.290 inches maximum

• Lateral Distance Between Mounting Hole Centers

  0.995 inches minimum and 1.005 inches maximum

• Body Length

  1.234 inches minimum and 1.266 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary quality

• Shaft Length

  0.060 inches nominal

• Mounting Facility Quantity

  2

• Terminal Type And Quantity

  3 wire lead

• Standard Taper Curve Per Section

  a single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Shaft Diameter

  0.109 inches minimum and 0.141 inches maximum

• Mounting Method

  unthreaded hole

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  175.0 single section

• Rotary Actuator Travel In Angular Deg

  7920.0 nominal

• Body Height

  0.296 inches minimum and 0.328 inches maximum

• Overall Height

  0.296 inches minimum and 0.328 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Cubic Measure

  0.128 cubic inches

• Section Quantity

  1

• Maximum Running Torque

  5.00 inch-ounces

• Overall Length

  1.281 inches minimum and 1.345 inches maximum

• Actuator Travel Control Feature

  stops

• Terminal Location

  rear end

• Body Style

  rectangular w/mounting holes/slots

• Test Data Document

  79500-335c779 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Shaft Style

  round, slotted

• Maximum Starting Torque

  5.00 inch-ounces

• Mounting Hole Diameter

  0.088 nominal mils

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section