8761433-1

Technical Characteristics

• Overall Width

  0.933 inches minimum and 0.943 inches maximum

• Shaft Type

  round, flatted single actuator

• Throw Quantity

  10 each section front

• Mounting Method

  threaded bushing single mounting facility

• Flat Height

  0.120 inches minimum single actuator and 0.130 inches maximum single actuator

• Switch Actuator Indexing Position Quantity

  12 single actuator

• Thread Class

  2a single mounting facility

• Nonturn Device Type

  tab at 3:00 o'clock

• Operating Temp Range

  -65.0/+85.0 deg celsius

• Terminal Type

  tab, solder lug

• Shaft Length

  0.765 inches minimum single actuator and 0.797 inches maximum single actuator

• Contact Voltage Rating In Volts

  110.0 ac at sea level

• Nonturn Device Radius

  0.370 inches minimum at 3:00 o'clock and 0.380 inches maximum at 3:00 o'clock

• Overall Height

  0.995 inches minimum and 1.005 inches maximum

• Switch Contact Basic Design

  nonpile-up symmetrical

• Thread Series Designator

  unef single mounting facility

• Shaft Diameter

  0.248 inches minimum single actuator and 0.251 inches maximum single actuator

• Contact Load Current Rating

  0.5 amperes resistive load ac at sea level

• Contact Voltage Rating In Volts

  28.0 dc at sea level

• Switch Actuator Positioning Increment

  30.0 degrees single actuator

• First Flat Length

  0.240 inches minimum single actuator and 0.260 inches maximum single actuator

• Contact Load Current Rating

  1.0 amperes resistive load dc at sea level

• Pole Quantity

  1 each section front

• Switch Actuator Stop Device Type

  fixed stop single actuator

• Test Data Document

  02734-8761433-1 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Contact Switching Action

  breaks before makes each section front

• Style Designator

  circular wafer, bushing mount

• Err Default

  err default and err default

• Individual Section Quantity

  4

• Detent Rotational Torque Range

  +1.500/+2.500 inch-pounds single actuator

• Shaft Flat/Slot Angular Location

  60.0 degrees from nonturn device single actuator

• Nominal Thread Size

  0.375 inches single mounting facility

• Overall Length

  2.515 inches minimum and 2.547 inches maximum