AP112-R-252-7

Technical Characteristics

• Center To Center Distance Between Terminals Parallel To Length

  0.906 inches maximum

• Switch Location And Position Designation

  internal at each pole

• Frequency In Hertz

  400.0 all locations

• Body Width

  1.938 inches maximum

• Thread Series Designator

  unef

• Unpackaged Unit Weight

  6.300 ounces

• Terminal Type And Quantity

  6 wire hook

• Switch Current Rating And Type In Amps

  1.0 ac and 0.5 dc

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  300.0 ac all locations

• Fragility Factor

  moderately rugged

• Switch Terminal Type

  tab, solder lug

• Center To Center Distance Between Terminals Parallel To Width

  0.646 inches maximum

• Body Length

  1.562 inches maximum

• Arc Quenching Method

  magnetic blowout

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  115.0 all locations

• Main Contact Tripping Mechanism Type

  trip free

• Manual Actuator Type And Quantity

  1 toggle

• Case Material

  metal

• Switch Voltage Rating And Type In Volts

  12.5 ac and 50.0 dc

• Body Style

  multipole-single actuator type

• Bushing Length

  0.375 inches maximum

• Switch Contact Arrangement

  single pole, double throw

• Maximum Continuous Load Current Rating Per Pole

  3.0 amperes ac all locations

• Inclosure Protection Type For Which Designed

  hermetically sealed

• Actuator Position Designation

  at pole two

• Trip Release Method

  magnetic all locations

• Operating Voltage Type And Rating Per Pole In Volts

  240.0 ac all locations

• Thread Quantity Per Inch

  32

• Nominal Thread Size

  0.375 inches

• Thread Pitch Diameters

  +0.3503/+0.3537 inches

• Internal Trip Release Configuration

  series trip all locations

• Auxiliary Switch Function And Quantity

  3 alarm

• Test Data Document

  56232-338362 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Actuator Function

  trip-reset

• Trip Release Characteristic

  time delay all locations

• Storage Type

  general purpose warehouse

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.055 minimum at 200 pct all locations and 0.950 maximum at 200 pct all locations

• Mounting Facility Type And Quantity

  1 threaded bushing w/panel seal

• Reset Method

  manual

• Circuit Protection Type

  overcurrent all locations

• Pole Quantity

  3

• Mounting Surface To Terminal End Distance

  1.859 inches maximum