10-00417-001

Technical Characteristics

• Section Quantity

  1

• Power Dissipation Rating Per Section In Watts

  5.0 7th secondary quality

• Overall Diameter

  1.826 inches maximum

• Rotary Actuator Travel In Angular Deg

  3600.0 minimum

• Function Characteristic Per Section

  7 oclock all primaries

• Terminal Type And Quantity

  4 turret

• Electrical Resistance Per Section

  9.7 percent, rated amperes c and better flooring

• Body Length

  2.165 inches nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  60.0 single section

• Shaft Style

  round

• Pilot Diameter Runout

  0.001 inches

• Overall Length

  2.855 inches nominal

• Function Conformity Per Section

  single section independent linearity

• Shaft Bearing Type

  ball

• Shaft Diameter

  0.2497 inches maximum

• Function Conformity Tolerance Per Section

  -0.10/+0.10 single section

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  2039.0 single section

• Shaft End Play

  0.005 inches

• Pilot Diameter

  1.3125 inches maximum

• Fragility Factor

  moderately rugged

• Actuator Travel Control Feature

  stops

• Terminal Location

  radially positioned over less than half the circumference

• Maximum Stop Torque

  750.00 inch-ounces

• Shaft Runout

  0.0005 inches

• Shaft Length

  0.690 inches nominal

• Mounting Method

  clamp ring

• Tap Location Tolerance Per Section

  -1.0/+1.0 deg angular rotation single section

• Body Diameter

  1.442 nominal centimeters

• Reliability Indicator

  not established

• Actuator Type

  single shaft

• Pilot Length

  0.0620 inches nominal

• Mounting Lip Diameter

  1.4370 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -70.0/+70.0 single section

• Effective Electrical Rotation In Deg Angular Rotation

  3500.0 minimum

• Test Data Document

  00724-10-00417 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Maximum Running Torque

  1.00 inch-ounces

• Undercut Diameter

  1.285 inches nominal

• Maximum Starting Torque

  1.00 inch-ounces

• Fixed Tap Quantity Per Section

  1 single section

• Lateral Runout

  0.001 inches

• Body Style

  cylindrical servo mounted

• Shaft Radial Play

  0.001 inches

• Mounting Lip Depth

  0.0930 nominal inches

• Mechanical Backlash In Deg Angular Rotation

  0.5

• Cubic Measure

  4.471 cubic inches

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Undercut Width

  0.0730 inches minimum