S5430W/883B

Technical Characteristics

• Undercut Diameter

  0.117 inches nominal

• Special Features

  resistor has a dummy cup

• Shaft Length

  0.480 inches nominal

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Maximum Starting Torque

  0.50 inch-ounces

• Shaft Runout

  0.001 inches

• Tap Location From Ccw Terminal Per Section In Ohms

  150.0 single section

• Function Conformity Tolerance Per Section

  -0.15/+0.15 single section

• Body Diameter

  0.875 inches nominal

• Shaft Diameter

  0.1248 inches maximum

• Terminal Type And Quantity

  4 turret

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Undercut Diameter

  0.750 inches nominal

• Undercut Width

  0.0570 inches minimum

• Function Characteristic Per Section

  single section table

• Section Quantity

  1

• Electrical Resistance Per Section

  6.000 kilohms single section

• Actuator Travel Control Feature

  continuous motion

• Reliability Indicator

  not established

• Body Length

  1.100 inches maximum

• Pilot Length

  0.0620 inches nominal

• Lateral Runout

  0.002 inches

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Undercut Length

  0.110 inches nominal

• Test Data Document

  89305-484605 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Effective Electrical Rotation In Deg Angular Rotation

  336.0 nominal

• Fixed Tap Quantity Per Section

  1 single section

• Pilot Diameter Runout

  0.00100 inches

• Body Style

  cylindrical servo mounted

• Shaft Radial Play

  0.001 inches

• Shaft Style

  round, stepped

• Tap Location Tolerance Per Section

  -2.0/+2.0 ohms single section

• Mounting Lip Depth

  0.0620 inches nominal

• Mounting Lip Diameter

  0.8750 inches nominal

• Function Conformity Per Section

  single section absolute linearity

• Pilot Diameter

  0.7810 inches maximum

• Actuator Type

  double ended shaft

• Shaft Bearing Type

  ball

• Shaft End Play

  0.00500 inches

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section