70D1G061R101W

Technical Characteristics

• Shaft Diameter

  0.120 inches minimum and 0.130 inches maximum

• Mounting Bushing Length

  0.245 inches minimum and 0.255 inches maximum

• Body Width

  0.620 inches minimum and 0.630 inches maximum

• Shaft Bearing Type

  sleeve

• Effective Electrical Rotation In Deg Angular Rotation

  260.0 nominal

• Center To Center Distance Between Terminals

  0.349 inches minimum and 0.369 inches maximum

• Screw Thread Quantity Per Inch

  32.0

• Mounting Method

  standard bushing

• Center To Center Distance Between Terminal Rows

  0.349 inches minimum and 0.369 inches maximum

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.349 inches minimum and 0.369 inches maximum

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Standard Taper Curve Per Section

  a single section

• Section Quantity

  1

• Body Style

  35b rectangular bushing mounted

• Reliability Indicator

  not established

• Terminal Length

  0.203 inches nominal

• Shaft Length

  0.948 inches minimum and 0.958 inches maximum

• Body Length

  1.117 inches minimum and 1.127 inches maximum

• Body Height

  0.620 inches minimum and 0.630 inches maximum

• Shaft Style

  1c round

• Switch Type

  push

• Switch Voltage Rating In Volts

  120.0

• Actuator Type

  single shaft

• Maximum Starting Torque

  6.00 inch-ounces (ounce-inches)

• Maximum Running Torque

  0.50 inch-ounces (ounce-inches)

• Maximum Stop Torque

  64.00 inch-ounces (ounce-inches)

• Nonturn Device Location

  at 9 oclock

• Nonturn Device Radius

  0.300 inches minimum and 0.310 inches maximum

• Switch Operating Position

  any position of rotation travel

• Switch Contact Arrangement

  single pole, single throw, normally open, one position momentary

• Fragility Factor

  moderately rugged

• Screw Thread Diameter

  0.245 inches minimum and 0.255 inches maximum

• Screw Thread Series Designator

  unef

• Terminal Location

  lower adjacent side two rows

• Features Provided

  humidity proof and switch

• Cubic Measure

  0.175 cubic inches

• Electrical Resistance Per Section

  100.0 ohms single section

• Rotary Actuator Travel In Angular Deg

  305.0 nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  100.0 single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -150.0 to 150.0 single section

• Resistance Tolerance Per Section In Percent

  -10.0 to 10.0 single section

• Actuator Travel Control Feature

  stops

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Switch Current Type And Rating In Amps

  2.000 ac

• Terminal Type And Quantity

  8 pin and 3 tab, solder lug