BL18105
Resistors
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
BL18105
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Actuator Travel Control Feature
stops
-
Fragility Factor
moderately rugged
-
Power Dissipation Rating Per Section In Watts
2.0 free air all sections
-
Terminal Location
rear-bottom
-
Section Quantity
2
-
Nonturn Device Radius
0.422 inches minimum and 0.452 inches maximum
-
Body Style
cylindrical bushing mounted
-
Switch Current Type And Rating In Amps
0.008 dc
-
Rotary Actuator Travel In Angular Deg
275.0 minimum and 285.0 maximum
-
Switch Type
rotary
-
Undercut Length
0.589 inches minimum and 0.651 inches maximum
-
Shaft Bearing Type
bearing
-
Actuator Type
dual concentric
-
Precious Material
gold
-
Maximum Running Torque
6.00 inch-ounces
-
Cubic Measure
0.486 cubic inches
-
Precious Material And Location
terminals gold
-
Screw Thread Diameter
0.375 inches nominal
-
Resistance Tolerance Per Section In Percent
-5.0/+5.0 all sections
-
Shaft Style
round, stepped
-
Body Length
0.953 inches minimum and 1.015 inches maximum
-
Maximum Starting Torque
6.00 inch-ounces
-
Body Diameter
0.719 inches minimum and 0.781 inches maximum
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section
-
Reliability Indicator
not established
-
Switch Contact Arrangement
single pole, single throw, normally closed
-
Screw Thread Series Designator
unef
-
Shaft Length
1.189 inches minimum and 1.251 inches maximum
-
Switch Operating Position
start of rotation
-
Nonturn Device Location
at 9 oclock
-
Switch Voltage Rating In Volts
350.0
-
Mounting Method
standard bushing
-
Standard Taper Curve Per Section
a all sections
-
Features Provided
humidity proof and switch
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 all sections
-
Electrical Resistance Per Section
5.0 kilohms all sections
-
Screw Thread Quantity Per Inch
32.0
-
Effective Electrical Rotation In Deg Angular Rotation
275.0 minimum and 285.0 maximum
-
Shaft Diameter
0.249 inches minimum and 0.251 inches maximum
-
Mounting Bushing Length
0.234 inches minimum and 0.266 inches maximum
-
Undercut Diameter
0.124 inches minimum and 0.126 inches maximum
-
Terminal Type And Quantity
8 tab, solder lug