116WS-330

Technical Characteristics

• Function Conformity Per Section

  single section absolute conformity

• Terminal Type And Quantity

  3 turret

• Shaft End Play

  0.005 inches

• Shaft Style

  round, slotted

• Shaft Bearing Type

  ball

• Function Conformity Tolerance Per Section

  -2.00/+2.00 single section

• Mounting Lip Depth

  0.0670 nominal centimeters

• Electrical Resistance Per Section

  1.0 percent, rated amperes c and better flooring

• Body Length

  0.650 inches maximum

• Body Diameter

  1.065 nominal centimeters

• Shaft Length

  0.512 inches maximum

• Overall Length

  0.995 inches maximum

• Pilot Diameter Runout

  0.001 inches

• Pilot Length

  0.0670 inches maximum

• Body Style

  cylindrical servo mounted

• Undercut Width

  0.0670 inches maximum

• Shaft Diameter

  0.1249 inches maximum

• Mounting Lip Diameter

  1.0650 inches maximum

• Undercut Diameter

  1.000 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  100.0 single section

• Shaft Radial Play

  0.002 inches

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Lateral Runout

  0.002 inches

• Actuator Type

  single shaft

• Pilot Diameter

  1.0000 inches maximum

• Reliability Indicator

  not established

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary quality

• Actuator Travel Control Feature

  continuous motion

• Effective Electrical Rotation In Deg Angular Rotation

  358.0 maximum

• Overall Diameter

  1.338 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Function Characteristic Per Section

  7 oclock 11th primary

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Test Data Document

  18876-+12934-004 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Features Provided

  humidity proof

• Maximum Starting Torque

  1.50 inch-ounces

• Maximum Running Torque

  1.50 inch-ounces

• Section Quantity

  1

• Shaft Runout

  0.002 inches