5M1665-0002

Technical Characteristics

• Contact Switching Action

  breaks before makes 3rd section in-line

• Overall Length

  5.360 inches nominal

• Pole Quantity

  1 2nd section rear

• Individual Section Quantity

  3

• Flat Height

  0.210 inches nominal 1st actuator

• First Flat Length

  0.250 inches nominal 2nd actuator

• Err Default

  err default

• Shaft Type

  round, hollowed, flatted 1st actuator

• Nominal Thread Size

  0.375 inches single mounting facility

• Overall Height

  1.250 inches maximum

• Operating Temp Range

  -65.0/+70.0 deg celsius

• Style Designator

  tap, square frame

• Hazardous Locations/Environmental Protection

  explosion proof

• Mounting Method

  threaded bushing w/panel seal single mounting facility

• Features Provided

  cam actuated and pull to turn

• Thread Class

  2a single mounting facility

• Throw Quantity

  1 1st section rear

• Shaft Diameter

  0.250 inches nominal 1st actuator

• Switch Actuator Indexing Position Quantity

  2 2nd actuator

• Terminal Type

  tab, solder lug

• Special Features

  with solenoid

• Shaft Length

  0.930 inches nominal 2nd actuator

• Thread Series Designator

  unef single mounting facility

• Switch Actuator Positioning Increment

  30.0 degrees 1st actuator

• Shaft Length

  0.430 inches nominal 1st actuator

• Cam Actuated Switch Contact Arrangement

  2 pole, double throw, double break/double make, permanent jumper, both positions maintained single switch 3rd section in-line

• Overall Width

  1.250 inches maximum

• End Item Identification

  envir system

• Shaft Type

  round, flat, undercut 2nd actuator

• Throw Quantity

  3 2nd section rear

• Pole Quantity

  1 1st section rear

• Nonturn Device Type

  slotted bushing at 2:30 o'clock

• First Flat Length

  0.410 inches nominal 1st actuator

• Detent Rotational Torque Range

  +12.000/+64.000 inch-ounces single actuator

• Shaft Flat/Slot Angular Location

  337.5 degrees from nonturn device all actuators

• Flat Height

  0.100 inches nominal 2nd actuator

• Switch Actuator Indexing Position Quantity

  3 1st actuator

• Contact Load Current Rating

  5.0 amperes resistive load dc at sea level and 2.0 amperes inductive load dc at sea level

• Switch Contact Basic Design

  nonpile-up symmetrical and nonpile-up nonsymmetrical

• Contact Voltage Rating In Volts

  28.0 dc at sea level

• Shaft Diameter

  0.125 inches nominal 2nd actuator