AP411-1R5676-1

Technical Characteristics

• Internal Trip Release Configuration

  series trip second location

• Operating Voltage Type And Rating Per Pole In Volts

  250.0 ac third location

• Manual Actuator Type And Quantity

  1 toggle

• Circuit Protection Type

  overvoltage first location

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  300.0 ac second location

• Frequency In Hertz

  60.0 all locations

• Trip Release Characteristic

  time delay second location

• Body Length

  1.500 inches maximum

• Internal Trip Release Configuration

  series trip third location

• Maximum Continuous Load Current Rating Per Pole

  20.0 amperes ac second location

• Switch Current Rating And Type In Amps

  0.5 ac

• Main Contact Tripping Mechanism Type

  trip free

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  115.0 all locations

• Special Features

  no current on pole one

• Trip Release Characteristic

  time delay third location

• Thread Series Designator

  unef

• Center To Center Distance Between Terminals Parallel To Length

  0.844 inches minimum and 0.906 inches maximum

• Auxiliary Switch Function And Quantity

  1 alarm

• Switch Terminal Type

  quick disconnect, male

• Body Width

  1.875 inches maximum

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  300.0 ac third location

• Internal Trip Release Configuration

  relay trip first location

• Switch Voltage Rating And Type In Volts

  125.0 ac

• Bushing Length

  0.332 inches minimum and 0.375 inches maximum

• Terminal Type And Quantity

  6 wire hook and 2 quick disconnect, male

• Maximum Continuous Load Current Rating Per Pole

  20.0 amperes ac third location

• Nonturn Device Diameter

  0.250 inches nominal

• Pole Quantity

  3

• Operating Voltage Type And Rating Per Pole In Volts

  115.0 ac first location

• Reset Method

  manual

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.500 minimum at 200 pct second location and 9.000 maximum at 200 pct second location

• Mounting Facility Type And Quantity

  1 threaded bushing w/panel seal

• Switch Location And Position Designation

  internal at pole three

• Storage Type

  general purpose warehouse

• Inclosure Protection Type For Which Designed

  moisture resistant and shockproof and hermetically sealed and salt spray proof and vibrationproof

• Actuator Function

  trip-reset

• Operating Voltage Type And Rating Per Pole In Volts

  250.0 ac second location

• Nominal Thread Size

  0.375 inches

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.500 minimum at 200 pct third location and 9.000 maximum at 200 pct third location

• Thread Quantity Per Inch

  32

• Trip Release Method

  magnetic all locations

• Mounting Surface To Terminal End Distance

  1.780 inches maximum

• Center To Center Distance Between Terminals Parallel To Width

  0.595 inches minimum and 0.656 inches maximum

• Actuator Position Designation

  at pole two

• Switch Contact Arrangement

  single pole, double throw

• Nonturn Device Location

  at 3 oclock and at 9 oclock

• Body Style

  multipole-single actuator type

• Trip Release Characteristic

  instantaneous first location

• Case Material

  metal