609-0373-001

Technical Characteristics

• Function Characteristic Per Section

  7 oclock all primaries

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Undercut Width

  0.0570 inches minimum

• Section Quantity

  1

• Power Dissipation Rating Per Section In Watts

  2.0 7th secondary quality

• Body Diameter

  0.875 nominal inches

• Shaft Runout

  0.002 inches

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Terminal Type And Quantity

  3 turret

• Maximum Running Torque

  0.60 inch-ounces

• Shaft End Play

  0.00500 inches

• Shaft Bearing Type

  ball

• Function Conformity Per Section

  single section independent linearity

• Mounting Lip Diameter

  0.8750 inches nominal

• Undercut Diameter

  0.781 inches maximum

• Mounting Lip Depth

  0.0620 nominal inches

• Shaft Style

  round

• Shaft Diameter

  0.1245 inches minimum and 0.1248 inches maximum

• Special Features

  resistors screened per collins specification580-0639-001

• Body Style

  cylindrical servo mounted

• Electrical Resistance Per Section

  5.000 percent, rated amperes c and better flooring

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Body Length

  0.875 inches nominal

• Pilot Diameter

  0.6250 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Shaft Radial Play

  0.002 inches

• Pilot Length

  0.0620 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Pilot Diameter Runout

  0.00200 inches

• Actuator Type

  single shaft with gear

• Lateral Runout

  0.004 inches

• Mounting Method

  clamp ring

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -40.0/+40.0 single section

• Test Data Document

  13499-809-0373 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Terminal Location

  radially positioned over less than half the circumference

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Function Conformity Tolerance Per Section

  -0.25/+0.25 single section

• Shaft Length

  0.375 inches nominal

• Maximum Starting Torque

  0.60 inch-ounces