393754

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Maximum Stop Torque

  128.00 inch-ounces

• Terminal Type And Quantity

  3 turret

• Fragility Factor

  rugged

• Terminal Location

  rear end

• Shaft Length

  0.688 inches nominal

• Shaft Diameter

  0.248 inches minimum and 0.251 inches maximum

• Body Style

  cylindrical bushing mounted

• Maximum Running Torque

  6.00 inch-ounces

• Screw Thread Diameter

  0.375 inches nominal

• Mounting Method

  standard bushing w/panel seal and standard bushing w/shaft seal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 single section

• Electrical Resistance Per Section

  10.000 kilohms single section

• Rotary Actuator Travel In Angular Deg

  300.0 nominal

• Body Length

  0.500 inches maximum

• Power Dissipation Rating Per Section In Watts

  0.25 free air single section

• First Flat Length

  0.255 inches nominal

• Maximum Starting Torque

  6.00 inch-ounces

• Mounting Bushing Length

  0.315 inches nominal

• Test Data Document

  80045-393754 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Flat Height

  0.186 inches minimum and 0.188 inches maximum

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Resistance Temp Characteristic Range Per Section In Percent

  -3.0/+0.0 -55 deg celsius single section and -5.0/+10.0 -25 deg celsius single section and -5.0/+10.0 25 deg celsius single section and +0.0/+3.0 120 deg celsius single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1

• Body Diameter

  0.720 inches nominal

• Shaft Style

  round, parallel flatted

• Screw Thread Quantity Per Inch

  32.0

• Standard Taper Curve Per Section

  c single section