200FL1-211

Technical Characteristics

• Shaft Length

  0.687 inches nominal

• Electrical Resistance Per Section

  2.000 kilohms single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Reliability Indicator

  not established

• Pilot Diameter Runout

  0.00200 inches

• Actuator Travel Control Feature

  continuous motion

• Mounting Method

  clamp ring

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Maximum Starting Torque

  0.50 inch-ounces

• Function Characteristic Per Section

  single section linear

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  25.0 single section

• Terminal Type And Quantity

  4 turret

• Undercut Width

  0.0550 inches minimum

• Pilot Length

  0.0350 inches minimum and 0.0670 inches maximum

• Maximum Running Torque

  0.50 inch-ounces

• Section Quantity

  1

• Terminal Location

  radially positioned over more than half the circumference

• Function Conformity Tolerance Per Section

  -0.10/+0.10 single section

• Shaft Diameter

  0.2495 inches minimum and 0.2500 inches maximum

• Pilot Diameter

  1.8745 inches minimum and 1.8750 inches maximum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -400.0/+400.0 single section

• Mounting Lip Diameter

  2.0000 inches maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Shaft Style

  round, slotted

• Shaft Bearing Type

  ball

• Actuator Type

  double ended shaft

• Function Conformity Per Section

  single section absolute linearity

• Effective Electrical Rotation In Deg Angular Rotation

  340.0 nominal

• Tap Location From Ccw Terminal Per Section In Ohms

  1000.0 single section

• Mounting Lip Depth

  0.0550 inches minimum and 0.0670 inches maximum

• Body Diameter

  2.000 inches maximum

• Body Length

  0.910 inches maximum

• Body Style

  cylindrical servo mounted

• Fixed Tap Quantity Per Section

  1 single section

• Undercut Diameter

  1.8745 inches minimum and 1.8750 inches maximum