7648736P013

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Power Dissipation Rating Per Section In Watts

  2.0 free air all sections

• Section Quantity

  2

• Shaft End Play

  0.00500 inches

• Shaft Bearing Type

  ball

• Function Characteristic Per Section

  all sections linear

• Fixed Tap Quantity Per Section

  1 1st section

• Special Features

  50kilohm load resistor on second section wiper

• Maximum Running Torque

  0.70 inch-ounces

• Mechanical Backlash In Deg Angular Rotation

  0.041

• Function Conformity Tolerance Per Section

  -0.05/+0.05 1st section

• Maximum Starting Torque

  0.70 inch-ounces

• Pilot Length

  0.1320 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  350.0 nominal

• Tap Location Tolerance Per Section

  -250.0/+250.0 ohms 1st section

• Shaft Style

  round

• Resistance Temp Characteristic Range Per Section In Percent

  -5.0/+5.0 -65 deg celsius all sections and -5.0/+5.0 105 deg celsius all sections and -5.0/+5.0 75 deg celsius all sections and -4.0/+4.0 -15 deg celsius all sections and -2.5/+2.5 50 deg celsius all sections and -5.0/+5.0 125 deg celsius all sections

• Mounting Lip Depth

  0.0930 inches nominal

• Undercut Width

  0.0730 inches minimum

• Body Length

  1.800 inches maximum

• Electrical Resistance Per Section

  5.000 kilohms all sections

• Function Conformity Tolerance Per Section

  -0.10/+0.10 2nd section

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Pilot Diameter Runout

  0.00100 inches

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Function Conformity Per Section

  all sections independent linearity

• Lateral Runout

  0.002 inches

• Mounting Lip Diameter

  1.4370 inches nominal

• Body Diameter

  1.453 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Undercut Diameter

  1.315 inches maximum

• Mounting Method

  clamp ring

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 all sections

• Unpackaged Unit Weight

  168.00 grams

• Shaft Diameter

  0.125 inches maximum

• Tap Location From Ccw Terminal Per Section In Ohms

  2500.0 1st section

• Shaft Length

  0.672 inches nominal

• Pilot Diameter

  1.3120 inches nominal

• Shaft Runout

  0.001 inches

• Terminal Type And Quantity

  7 turret

• Terminal Location

  radially positioned over more than half the circumference

• Test Data Document

  03538-7648736 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)