AP12-1-72F-1751

Technical Characteristics

• Trip Release Characteristic

  time delay all locations

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.200 minimum at 200 pct and

• Inclosure Protection Type For Which Designed

  vibration resistant

• Thread Series Designator

  unef

• Terminal Type And Quantity

  4 wire hook

• Main Contact Tripping Mechanism Type

  trip free

• Manual Actuator Type And Quantity

  1 toggle

• Actuator Function

  trip-reset

• Actuator Position Designation

  between pole one and two

• Internal Trip Release Configuration

  series trip all locations

• Nominal Thread Size

  0.375 inches

• Trip Delay Time In Seconds Per Rated Continuous Current

  6.000 maximum at 200 pct all locations

• Inclosure Protection Type For Which Designed

  hermetically sealed and

• Inclosure Protection Type For Which Designed

  shock resistant and

• Special Features

  inertial delay included on item

• Frequency In Hertz

  50.0 or

• Frequency In Hertz

  60.0 all locations

• Reset Method

  manual

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  115.0 all locations

• Trip Release Method

  magnetic all locations

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  1000.0 ac all locations

• Operating Voltage Type And Rating Per Pole In Volts

  240.0 ac all locations

• Maximum Continuous Load Current Rating Per Pole

  1.75 amperes ac all locations

• Thread Quantity Per Inch

  32

• Iii Special Handling Feature

  magnetic

• Iii Storage Type

  general purpose warehouse

• Mounting Facility Type And Quantity

  1 threaded bushing w/panel seal

• Iii Arc Quenching Method

  magnetic blowout

• Pole Quantity

  2

• Mounting Surface To Terminal End Distance

  1.780 inches maximum

• Iii Fragility Factor

  moderately rugged

• Iii Nonturn Device Diameter

  0.171 inches maximum

• Iii Nonturn Device Diameter

  0.109 inches minimum and

• Iii Nonturn Device Length

  0.125 inches maximum

• Iii Nonturn Device Length

  0.063 inches minimum and

• Iii Nonturn Device Radius

  0.594 inches minimum and

• Iii Nonturn Device Location

  at 9 oclock

• Center To Center Distance Between Terminals Parallel To Width

  0.594 inches minimum and

• Center To Center Distance Between Terminals Parallel To Length

  0.906 inches maximum

• Case Material

  metal

• Body Length

  1.500 inches maximum

• Bushing Length

  0.380 inches maximum

• Thread Pitch Diameters

  0.3503 to 0.3537 inches

• Circuit Protection Type

  overcurrent all locations

• Iii Nonturn Device Radius

  0.656 inches maximum

• Iii Nonturn Device Location

  at 3 oclock and

• Center To Center Distance Between Terminals Parallel To Width

  0.656 inches maximum

• Center To Center Distance Between Terminals Parallel To Length

  0.844 inches minimum and

• Body Width

  1.250 inches maximum

• Body Style

  1b multipole-single actuator type