6752-317-20

Technical Characteristics

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  138.0 all locations

• Main Contact Tripping Mechanism Type

  trip free

• Manual Actuator Type And Quantity

  1 push-pull

• Actuator Position Designation

  at pole two

• Inclosure Protection Type For Which Designed

  explosion proof and moisture resistant and corrosion resistant and dustproof and sand resistant and fungus resistant

• Iii Unpackaged Unit Weight

  0.650 pounds

• Terminal Type And Quantity

  6 tab w/screw

• Thread Series Designator

  unc

• Frequency In Hertz

  400.0 all locations

• Trip Release Ambient Temp Rating

  25.0 deg celsius nominal all locations

• Trip Delay Time In Seconds Per Rated Continuous Current

  20.000 minimum at 200 pct and 50.000 maximum at 200 pct all locations

• Nominal Thread Size

  0.138 inches

• Actuator Function

  trip-reset

• Reset Method

  manual

• Maximum Continuous Load Current Rating Per Pole

  20.0 amperes ac all locations

• Thread Quantity Per Inch

  32

• Iii Special Handling Feature

  magnetic

• Iii Storage Type

  general purpose warehouse

• Iii Fragility Factor

  moderately rugged

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  1.410 inches minimum and 1.530 inches maximum

• Body Height

  2.340 inches minimum and 2.400 inches maximum

• Body Width

  2.250 inches maximum

• Bushing Length

  0.235 inches minimum and 0.250 inches maximum

• Body Style

  4b multipole-single actuator type

• Trip Release Characteristic

  time delay all locations

• Trip Release Method

  thermal-magnetic all locations

• Circuit Protection Type

  overcurrent all locations

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  6000.0 ac all locations

• Operating Voltage Type And Rating Per Pole In Volts

  120.0 ac all locations

• Mounting Facility Type And Quantity

  6 threaded hole

• Iii Arc Quenching Method

  magnetic blowout

• Pole Quantity

  3

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

  0.720 inches minimum and 0.780 inches maximum

• Center To Center Distance Between Terminals Parallel To Width

  0.720 inches minimum and 0.780 inches maximum

• Center To Center Distance Between Terminals Parallel To Length

  1.160 inches minimum and 1.220 inches maximum

• Case Material

  plastic

• Body Length

  2.189 inches maximum