R90135/01-0001

Technical Characteristics

• Reliability Failure Rate Level In Percent

  0.100

• Center To Center Distance Between Terminal Rows

  0.100 inches nominal

• Body Width

  0.235 inches nominal

• End Item Identification

  data reconstr

• Section Quantity

  1

• Test Data Document

  82227-r90135/01 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Hole Diameter

  0.073 nominal inches

• Maximum Running Torque

  5.00 inch-ounces

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.100 nominal inches

• Lateral Distance Between Mounting Hole Centers

  0.520 inches nominal

• Body Style

  rectangular w/mounting holes

• Shaft Length

  0.045 inches maximum

• Shaft Diameter

  0.078 inches nominal

• Shaft Style

  round, slotted

• Maximum Starting Torque

  5.00 inch-ounces

• Center To Center Distance Between Terminals

  0.200 inches nominal

• Body Length

  0.500 inches nominal

• Rotary Actuator Travel In Angular Deg

  7200.0 minimum and 15120.0 maximum

• Shaft Bearing Type

  sleeve

• Electrical Resistance Per Section

  50.0 percent, rated amperes c and better flooring

• Power Dissipation Rating Per Section In Watts

  0.75 7th secondary quality

• Cubic Measure

  0.047 cubic inches

• Terminal Location

  left adjacent side two rows

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Terminal Length

  0.172 inches minimum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Reliability Indicator

  established

• Actuator Travel Control Feature

  clutch

• Mounting Method

  terminal and unthreaded hole

• Body Height

  0.500 inches nominal

• Actuator Type

  single shaft

• Mounting Facility Quantity

  2

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Standard Taper Curve Per Section

  a single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Effective Electrical Rotation In Deg Angular Rotation

  7200.0 minimum and 15120.0 maximum

• Terminal Type And Quantity

  3 pin