MIL-R-39035/1

Technical Characteristics

• ~1

  data on certain environmental and performanc

• Center To Center Distance Between Terminals

  0.690 inches minimum and 0.710 inches maximum

• Shaft Diameter

  0.100 inches minimum and 0.130 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  6120.0 minimum and 9720.0 maximum

• Body Length

  1.240 inches minimum and 1.260 inches maximum

• Power Dissipation Rating Per Section In Watts

  0.75 7th secondary quality

• Terminal Location

  lower adjacent side two rows

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Mounting Facility Quantity

  2

• Maximum Running Torque

  8.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.290 nominal mils and 0.310 nominal centimeters

• Standard Taper Curve Per Section

  a single section

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Terminal Length

  0.469 inches minimum and 0.531 inches maximum

• Features Provided

  humidity proof

• Terminal Type And Quantity

  3 pin

• Cubic Measure

  0.075 cubic inches

• Rotary Actuator Travel In Angular Deg

  6120.0 minimum and 9720.0 maximum

• Section Quantity

  1

• Maximum Starting Torque

  8.00 inch-ounces

• Body Width

  0.180 inches minimum and 0.200 inches maximum

• Mounting Hole Diameter

  0.088 nominal mils and 0.098 nominal centimeters

• Lateral Distance Between Mounting Hole Centers

  0.995 inches minimum and 1.005 inches maximum

• Reliability Indicator

  established

• Actuator Travel Control Feature

  clutch

• Mounting Method

  terminal and unthreaded hole

• Actuator Type

  single shaft

• Reliability Failure Rate Level In Percent

  0.010

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -100.0/+100.0 single section

• Specification/Standard Data

  81349-mil-r-39035/1 government specification

• Test Data Document

  81349-mil-r-39035 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type

• Fragility Factor

  moderately rugged

• Shaft Length

  0.036 inches minimum and 0.080 inches maximum

• Body Style

  rectangular w/mounting holes/slots

• Shaft Style

  round, slotted

• Body Height

  0.300 inches minimum and 0.330 inches maximum

• Electrical Resistance Per Section

  500.0 ohms c and better flooring

• Center To Center Distance Between Terminal Rows

  0.090 inches minimum and 0.110 inches maximum