D6001513-1
Resistors
RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION
D6001513-1
Clarostat Sensors And Controls
RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Actuator Travel Control Feature
stops
-
Fragility Factor
moderately rugged
-
Maximum Running Torque
3.00 inch-ounces
-
Shaft Diameter
0.124 inches minimum and 0.126 inches maximum
-
Maximum Starting Torque
3.00 inch-ounces
-
First Flat Length
0.360 inches minimum and 0.390 inches maximum
-
Body Width
0.484 inches minimum and 0.516 inches maximum
-
Terminal Length
0.250 inches minimum
-
Effective Electrical Rotation In Deg Angular Rotation
245.0 minimum and 255.0 maximum
-
Shaft Bearing Type
sleeve
-
Body Height
0.484 inches minimum and 0.516 inches maximum
-
Body Length
0.469 inches minimum and 0.500 inches maximum
-
Terminal Location
lower adjacent side single row
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section
-
Mounting Bushing Length
0.234 inches minimum and 0.266 inches maximum
-
Maximum Stop Torque
48.00 inch-ounces
-
Rotary Actuator Travel In Angular Deg
290.0 minimum and 300.0 maximum
-
Center To Center Distance Between Center Terminal And Outside Terminal
0.095 nominal mils and 0.105 nominal centimeters
-
Features Provided
humidity proof and shaft seal
-
Actuator Type
single shaft
-
Reliability Indicator
not established
-
Power Dissipation Rating Per Section In Watts
1.0 7th secondary quality
-
Screw Thread Series Designator
unef
-
Shaft Style
round, flatted
-
Shaft Length
0.969 inches minimum and 1.031 inches maximum
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
85.0 single section
-
End Item Identification
5895-01-133-6600 communication control
-
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section
-
Flat Height
0.089 inches minimum and 0.099 inches maximum
-
Electrical Resistance Per Section
10.0 percent, rated amperes c and better flooring
-
Terminal Type And Quantity
3 pin
-
Screw Thread Diameter
0.250 inches nominal
-
Test Data Document
57045-d6001513-1 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
-
Center To Center Distance Between Terminals
0.195 inches minimum and 0.205 inches maximum
-
Cubic Measure
0.130 cubic inches
-
Section Quantity
1
-
Body Style
rectangular bushing mounted
-
Mounting Method
standard bushing and tab
-
Screw Thread Quantity Per Inch
32.0
-
Standard Taper Curve Per Section
c single section