D6001513-1

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Maximum Running Torque

  3.00 inch-ounces

• Shaft Diameter

  0.124 inches minimum and 0.126 inches maximum

• Maximum Starting Torque

  3.00 inch-ounces

• First Flat Length

  0.360 inches minimum and 0.390 inches maximum

• Body Width

  0.484 inches minimum and 0.516 inches maximum

• Terminal Length

  0.250 inches minimum

• Effective Electrical Rotation In Deg Angular Rotation

  245.0 minimum and 255.0 maximum

• Shaft Bearing Type

  sleeve

• Body Height

  0.484 inches minimum and 0.516 inches maximum

• Body Length

  0.469 inches minimum and 0.500 inches maximum

• Terminal Location

  lower adjacent side single row

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Mounting Bushing Length

  0.234 inches minimum and 0.266 inches maximum

• Maximum Stop Torque

  48.00 inch-ounces

• Rotary Actuator Travel In Angular Deg

  290.0 minimum and 300.0 maximum

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.095 nominal mils and 0.105 nominal centimeters

• Features Provided

  humidity proof and shaft seal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary quality

• Screw Thread Series Designator

  unef

• Shaft Style

  round, flatted

• Shaft Length

  0.969 inches minimum and 1.031 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• End Item Identification

  5895-01-133-6600 communication control

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Flat Height

  0.089 inches minimum and 0.099 inches maximum

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better flooring

• Terminal Type And Quantity

  3 pin

• Screw Thread Diameter

  0.250 inches nominal

• Test Data Document

  57045-d6001513-1 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Center To Center Distance Between Terminals

  0.195 inches minimum and 0.205 inches maximum

• Cubic Measure

  0.130 cubic inches

• Section Quantity

  1

• Body Style

  rectangular bushing mounted

• Mounting Method

  standard bushing and tab

• Screw Thread Quantity Per Inch

  32.0

• Standard Taper Curve Per Section

  c single section