PC70112-1
Resistors
RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION
PC70112-1
RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Actuator Travel Control Feature
stops
-
Fragility Factor
moderately rugged
-
End Item Identification
f-15e acft
-
Terminal Location
rear-bottom
-
Body Length
0.594 inches maximum
-
Shaft Diameter
0.124 inches minimum and 0.126 inches maximum
-
Body Style
cylindrical bushing mounted
-
Cubic Measure
0.082 cubic inches
-
Electrical Resistance Per Section
10.0 kilohms single section
-
Terminal Type And Quantity
6 tab, solder lug
-
Switch Type
rotary
-
Power Dissipation Rating Per Section In Watts
0.5 free air single section
-
Nonturn Device Location
at 12 oclock
-
Body Diameter
0.484 inches minimum and 0.516 inches maximum
-
Shaft Bearing Type
sleeve
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
120.0 single section
-
Maximum Stop Torque
64.00 inch-ounces
-
Switch Current Type And Rating In Amps
1.500 dc
-
Screw Thread Diameter
0.234 inches minimum and 0.266 inches maximum
-
Mounting Bushing Length
0.234 inches minimum and 0.266 inches maximum
-
Specification/Standard Data
09344-pc70112 manufacturers source control
-
Switch Voltage Rating In Volts
28.0
-
First Flat Length
0.422 inches minimum and 0.454 inches maximum
-
Effective Electrical Rotation In Deg Angular Rotation
248.0 nominal
-
Rotary Actuator Travel In Angular Deg
290.0 minimum and 300.0 maximum
-
Actuator Type
single shaft
-
Mechanical Backlash In Deg Angular Rotation
3.0
-
Reliability Indicator
not established
-
Screw Thread Series Designator
unef
-
Switch Operating Position
start of rotation
-
Shaft Style
round, flatted
-
Resistance Temp Characteristic Range Per Section In Percent
+0.0/+7.0 -55 deg celsius single section and +0.0/+3.5 -25 deg celsius single section and +0.0/+2.0 0 deg celsius single section and -2.5/+2.5 85 deg celsius single section and +0.0/+5.5 120 deg celsius single section
-
Maximum Running Torque
4.50 inch-ounces
-
Nonturn Device Radius
0.086 inches minimum and 0.096 inches maximum
-
Mounting Method
standard bushing
-
Standard Taper Curve Per Section
a single section
-
Shaft Length
0.484 inches minimum and 0.516 inches maximum
-
Features Provided
humidity proof and switch
-
Switch Contact Arrangement
single pole, single throw, normally open, both positions maintained
-
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section
-
Flat Height
0.092 inches minimum and 0.096 inches maximum
-
Maximum Starting Torque
4.50 inch-ounces
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 single section
-
Section Quantity
1
-
Screw Thread Quantity Per Inch
32.0