C8909-2-501C

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Maximum Stop Torque

  128.00 inch-ounces

• Mounting Bushing Length

  0.365 inches minimum and 0.385 inches maximum

• Body Style

  cylindrical bushing mounted

• Power Dissipation Rating Per Section In Watts

  0.5 free air single section

• Shaft Diameter

  0.240 inches minimum and 0.260 inches maximum

• Maximum Running Torque

  6.00 inch-ounces

• Body Diameter

  0.896 inches minimum and 0.916 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 single section

• Nonturn Device Radius

  0.428 inches minimum and 0.448 inches maximum

• Electrical Resistance Per Section

  500.0 ohms single section

• Terminal Type And Quantity

  3 tab, solder lug

• Resistance Tolerance Per Section In Percent

  -20.0/+20.0 single section

• Maximum Starting Torque

  6.00 inch-ounces

• Actuator Type

  single shaft

• Test Data Document

  81755-c8909 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Rotary Actuator Travel In Angular Deg

  251.0 minimum and 318.0 maximum

• Reliability Indicator

  not established

• Body Length

  0.443 inches minimum and 0.463 inches maximum

• Standard Taper Curve Per Section

  c single section

• Screw Thread Quantity Per Inch

  32.0

• Section Quantity

  1

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Effective Electrical Rotation In Deg Angular Rotation

  251.0 minimum and 318.0 maximum

• Screw Thread Diameter

  0.365 inches minimum and 0.385 inches maximum

• Features Provided

  humidity proof

• Cubic Measure

  2.987 cubic inches

• Terminal Location

  radially positioned over less than half the circumference

• Shaft Length

  0.865 inches minimum and 0.885 inches maximum

• First Flat Length

  0.365 inches minimum and 0.385 inches maximum

• Mounting Method

  standard bushing

• Nonturn Device Location

  at 9 oclock

• Shaft Style

  round, flatted

• Flat Height

  0.211 inches minimum and 0.221 inches maximum

• Screw Thread Series Designator

  unef