71A30-02-1-3N-F

Technical Characteristics

• Flat Height

  0.084 inches minimum single actuator and 0.104 inches maximum

• Shaft Diameter

  0.123 inches minimum single actuator and 0.126 inches maximum

• Thread Class

  2a single mounting facility

• Thread Length

  0.292 inches minimum single mounting facility and 0.332 inches maximum

• Overall Length

  1.580 inches minimum and 1.752 inches maximum

• Shaft Length

  0.355 inches minimum single actuator and 0.395 inches maximum

• Nonturn Device Type

  flatted bushing at 1:45 o'clock

• Nonturn Device Type

  flatted bushing at 9:00 o'clock

• Operating Temp Range

  -65.0 to 125.0 deg celsius

• Mounting Method

  threaded bushing single mounting facility

• Rotor Through Connection Quantity

  1 each section

• Switch Actuator Indexing Position Quantity

  3 single actuator

• Shaft Type

  round, flatted single actuator

• Contact Switching Action

  breaks before makes each section rear

• Contact Load Current Rating

  300.0 milliamperes resistive load ac at sea level

• Hazardous Locations/Environmental Protection

  moisture resistant and shock resistant and vibration resistant

• First Flat Length

  0.230 inches minimum single actuator and 0.270 inches maximum

• Overall Diameter

  0.730 inches minimum and 0.770 inches maximum

• Individual Section Quantity

  2

• Switch Contact Basic Design

  nonpile-up symmetrical

• Pole Quantity

  1 each section front

• Throw Quantity

  3 each section rear

• Nominal Thread Size

  0.250 inches single mounting facility

• Contact Voltage Rating In Volts

  115.0 ac at sea level

• Terminal Type

  tab, solder lug

• Switch Actuator Positioning Increment

  30.0 degrees single actuator

• Switch Actuator Stop Device Type

  fixed stop single actuator

• Precious Material And Location

  rotor contact and terminal surfaces gold and terminal surfaces and rotor contact silver

• Precious Material

  gold and silver

• Style Designator

  9 tap, circular, bushing mount

• Thread Series Designator

  unef single mounting facility