70N1G040R502W
Resistors
RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION
70N1G040R502W
RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Terminal Type And Quantity
3 tab, solder lug
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 single section
-
Actuator Travel Control Feature
stops
-
Resistance Tolerance Per Section In Percent
-10.0 to 10.0 single section
-
Power Dissipation Rating Per Section In Watts
2.0 free air single section
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-100.0 to 100.0 single section
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section
-
Electrical Resistance Per Section
5.0 kilohms single section
-
Features Provided
humidity proof
-
Terminal Location
lower adjacent side two rows
-
Screw Thread Series Designator
unef
-
Screw Thread Diameter
0.234 inches minimum and 0.266 inches maximum
-
End Item Identification
a/f37a-t50/t5
-
Maximum Running Torque
3.00 inch-ounces (ounce-inches)
-
Maximum Starting Torque
3.00 inch-ounces (ounce-inches)
-
Actuator Type
single shaft
-
Shaft Style
1c round
-
Body Length
0.562 inches minimum and 0.624 inches maximum
-
Reliability Indicator
not established
-
Body Style
57b rectangular bushing mounted
-
Standard Taper Curve Per Section
a single section
-
Rotary Actuator Travel In Angular Deg
295.0 minimum and 305.0 maximum
-
Cubic Measure
0.232 cubic inches
-
Mounting Method
standard bushing
-
Screw Thread Quantity Per Inch
32.0
-
Fragility Factor
moderately rugged
-
Nonturn Device Radius
0.289 inches minimum and 0.321 inches maximum
-
Nonturn Device Location
at 9 oclock
-
Maximum Stop Torque
64.00 inch-ounces (ounce-inches)
-
Effective Electrical Rotation In Deg Angular Rotation
260.0 nominal
-
Shaft Bearing Type
sleeve
-
Body Height
0.594 inches minimum and 0.626 inches maximum
-
Body Width
0.594 inches minimum and 0.626 inches maximum
-
Mounting Bushing Length
0.234 inches minimum and 0.266 inches maximum
-
Shaft Length
0.609 inches minimum and 0.641 inches maximum
-
Shaft Diameter
0.109 inches minimum and 0.141 inches maximum
-
Section Quantity
1