400-12938-1

Technical Characteristics

• Distance Between Mounting Facility Centers

  6.275 inches nominal

• Polarization Method

  mating end

• Operating Temp Rating

  -65.0 deg celsius minimum and 125.0 deg celsius maximum

• Contact Surface Treatment

  gold and nickel single mating end single contact grouping

• Insert Material

  glass and plastic single mating end

• ~1

  t grouping

• Contact Surface Treatment Document And Classification

  mil-g-45204,ty 2 mil spec 1st treatment response single mating end single contac

• Criticality Code Justification

  feat

• Terminal Type

  solder well single mating end single contact grouping

• ~1

  material is controlled by the same document and classifications are identical) s

• Insert Material Document And Classification

  mil-p-46161,grade b,class 15 mil spec all material responses (use only when all

• Included Contact Type

  brush socket single mating end single contact grouping

• ~1

  post should be positioned with retention tine as shown so post is parallel with

• ~3

  into correct position and reinstall into contact cavity

• Precious Material And Location

  contact surfaces gold

• Precious Material And Weight

  0.212 gold grains, troy

• Precious Material

  gold

• Overall Length

  6.595 inches maximum

• Overall Height

  0.670 inches maximum

• Overall Width

  0.590 inches maximum

• Body Style

  16g straight shape

• Environmental Protection

  heat resistant and cold resistant

• Unthreaded Mounting Hole Diameter

  0.122 inches minimum and 0.127 inches maximum

• Mating End Quantity

  1

• Contact Position Arrangement Style

  aaam 4 rows of contacts non-inserted board

• Contact Removability

  nonremovable single mating end single contact grouping

• Contact Maximum Current Rating In Amps

  5.0

• Connector Locking Method

  friction

• Features Provided

  low insertion force contact

• Terminal Location

  back single mating end single contact grouping

• Contact Material

  copper alloy single mating end single contact grouping

• ~2

  ingle mating end

• Included Contact Quantity

  212 single mating end single contact grouping

• ~2

  in 1o degrees of side of connector body; remove all misoriented contacts; rotate

• Special Features

  inspect rotational orientation of all wire wrap tails; flat side of 0.025 square