311-2315-00

Technical Characteristics

• Undercut Diameter

  0.077 inches minimum and 0.079 inches maximum

• Shaft Bearing Type

  sleeve

• Body Length

  0.781 inches minimum and 0.812 inches maximum

• Terminal Location

  lower adjacent side single row

• Shaft Style

  round, stepped

• Body Width

  0.469 inches minimum and 0.531 inches maximum

• Maximum Running Torque

  1.00 inch-ounces

• Terminal Type And Quantity

  6 wire loop

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Cubic Measure

  0.229 cubic inches

• Nonturn Device Location

  at 9 oclock

• Mounting Method

  standard bushing

• Standard Taper Curve Per Section

  a all sections

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 all sections

• Shaft Length

  0.844 inches minimum and 0.906 inches maximum

• Features Provided

  humidity proof

• Maximum Starting Torque

  4.50 inch-ounces

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better industrial clears

• Screw Thread Diameter

  0.250 inches nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better finish

• End Item Identification

  6625-01-027-0265 generator,sweep

• Body Style

  rectangular bushing mounted

• Body Height

  0.469 inches minimum and 0.531 inches maximum

• Screw Thread Quantity Per Inch

  32.0

• Fragility Factor

  moderately rugged

• Mounting Bushing Length

  0.244 inches minimum and 0.266 inches maximum

• Section Quantity

  2

• Nonturn Device Radius

  0.235 inches minimum and 0.266 inches maximum

• Shaft Diameter

  0.124 inches minimum and 0.126 inches maximum

• Undercut Length

  0.250 inches nominal

• Power Dissipation Rating Per Section In Watts

  0.5 free air all sections

• Actuator Type

  dual concentric