1005160-3

Technical Characteristics

• Fragility Factor

  moderately rugged

• Pole Quantity

  3

• Circuit Protection Type

  overcurrent all locations

• Bushing Length

  0.280 inches minimum and 0.380 inches maximum

• Reset Method

  manual

• Center To Center Distance Between Terminals Parallel To Width

  0.594 inches minimum and 0.656 inches maximum

• Mounting Facility Type And Quantity

  1 threaded bushing w/panel seal

• Storage Type

  general purpose warehouse

• Body Width

  1.844 inches minimum and 1.906 inches maximum

• Trip Release Characteristic

  time delay all locations

• Actuator Function

  trip-reset

• Internal Trip Release Configuration

  series trip all locations

• Switch Location And Position Designation

  internal at pole one

• Features Provided

  high inrush protection

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.500 minimum at 200 pct all locations and 9.000 maximum at 200 pct all locations

• Auxiliary Switch Function And Quantity

  1 alarm

• Nonturn Device Diameter

  0.094 inches minimum and 0.156 inches maximum

• Center To Center Distance Between Terminals Parallel To Length

  0.844 inches minimum and 0.906 inches maximum

• Thread Series Designator

  unef

• Frequency In Hertz

  47.0 all locations or 63.0 all locations

• Switch Terminal Type

  pin

• Maximum Continuous Load Current Rating Per Pole

  15.0 amperes ac all locations

• Arc Quenching Method

  magnetic blowout

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  115.0 all locations

• Main Contact Tripping Mechanism Type

  trip free

• Body Length

  1.500 inches maximum

• Manual Actuator Type And Quantity

  1 toggle

• Case Material

  metal

• Body Style

  multipole-single actuator type

• Nonturn Device Location

  at 3 oclock and at 9 oclock

• Switch Contact Arrangement

  single pole, double throw

• Terminal Type And Quantity

  4 wire hook

• Inclosure Protection Type For Which Designed

  hermetically sealed

• Actuator Position Designation

  at pole two

• Mounting Surface To Terminal End Distance

  1.780 inches maximum

• Nonturn Device Radius

  0.594 inches minimum and 0.656 inches maximum

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  500.0 ac all locations

• Trip Release Method

  magnetic-hydraulic all locations

• Operating Voltage Type And Rating Per Pole In Volts

  240.0 ac all locations

• Thread Quantity Per Inch

  32

• Nominal Thread Size

  0.375 inches

• Thread Pitch Diameters

  +0.3503/+0.3537 inches