64A7A39-1

Technical Characteristics

• Mounting Lip Diameter

  0.8750 inches nominal

• Shaft Bearing Type

  bearing

• Mounting Lip Depth

  0.0620 inches nominal

• Electrical Resistance Per Section

  1.0 kilohms all sections

• Function Characteristic Per Section

  8 oclock all primaries

• Maximum Starting Torque

  0.70 inch-ounces

• Tap Location Tolerance Per Section

  -0.1/+0.1 ohms all sections

• Pilot Diameter Runout

  0.001 inches

• Cubic Measure

  1.273 cubic inches

• Shaft Style

  round

• Shaft Diameter

  0.1245 inches minimum and 0.1248 inches maximum

• End Item Identification

  walleye mk 64

• Fixed Tap Quantity Per Section

  1 all sections

• Special Features

  external jumper wire between sections

• Body Style

  cylindrical servo mounted

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 all sections

• Terminal Type And Quantity

  8 tab, solder lug

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Tap Location From Ccw Terminal Per Section In Ohms

  500.0 all sections

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Shaft Radial Play

  0.002 inches

• Pilot Diameter

  0.6245 inches minimum and 0.6250 inches maximum

• Function Conformity Per Section

  all sections independent linearity

• Lateral Runout

  0.002 inches

• Pilot Length

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Function Characteristic Per Section

  9 oclock primary input

• Mounting Method

  clamp ring

• Body Diameter

  0.891 inches maximum

• Terminal Location

  radially positioned over less than half the circumference

• Maximum Stop Torque

  32.00 inch-ounces

• Features Provided

  humidity proof

• Body Length

  2.043 inches maximum

• Undercut Diameter

  0.750 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  1079.0 minimum and 1081.0 maximum

• Maximum Running Torque

  0.50 inch-ounces

• Power Dissipation Rating Per Section In Watts

  1.5 free air all sections

• Shaft Runout

  0.002 inches

• Undercut Width

  0.0520 inches nominal

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Shaft Length

  0.531 inches minimum and 0.594 inches maximum

• Shaft End Play

  0.005 inches

• Function Conformity Tolerance Per Section

  -0.10/+0.10 all sections

• Test Data Document

  10001-64a7a39 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Section Quantity

  2

• Rotary Actuator Travel In Angular Deg

  1080.0 minimum and 1090.0 maximum