AP116-1R-21702-2

Technical Characteristics

• Trip Release Method

  magnetic all locations

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  115.0 all locations

• Internal Trip Release Configuration

  series trip all locations

• Nominal Thread Size

  0.375 inches

• Switch Location And Position Designation

  internal at pole one

• Switch Terminal Type

  wire hook

• Switch Voltage Rating And Type In Volts

  120.0 ac and 50.0 dc

• Frequency In Hertz

  50.0 all locations or 60.0

• Thread Series Designator

  unef

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.800 minimum at 200 pct all locations and 8.000 maximum at 200 pct

• Auxiliary Switch Function And Quantity

  1 alarm

• Actuator Position Designation

  at pole two

• Actuator Function

  trip-reset

• Manual Actuator Type And Quantity

  1 toggle

• Main Contact Tripping Mechanism Type

  trip free

• Reset Method

  manual

• Trip Release Characteristic

  time delay all locations

• Circuit Protection Type

  overcurrent all locations

• Operating Voltage Type And Rating Per Pole In Volts

  250.0 ac all locations

• Pole Quantity

  3

• Fragility Factor

  moderately rugged

• Switch Contact Arrangement

  single pole, double throw

• Center To Center Distance Between Terminals Parallel To Width

  0.594 inches minimum and 0.656 inches maximum

• Center To Center Distance Between Terminals Parallel To Length

  0.844 inches minimum and 0.906 inches maximum

• Body Style

  1b multipole-single actuator type

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  5000.0 ac all locations

• Maximum Continuous Load Current Rating Per Pole

  20.0 amperes ac all locations

• Thread Quantity Per Inch

  32

• Storage Type

  general purpose warehouse

• Mounting Facility Type And Quantity

  1 threaded bushing w/panel seal

• Arc Quenching Method

  magnetic blowout

• Mounting Surface To Terminal End Distance

  1.780 inches maximum

• Nonturn Device Diameter

  0.219 inches minimum and 0.281 inches maximum

• Nonturn Device Radius

  0.625 inches minimum and 0.630 inches maximum

• Nonturn Device Location

  at 3 oclock and at 9 oclock

• Case Material

  metal

• Body Width

  1.875 inches maximum

• Body Length

  1.562 inches maximum

• Bushing Length

  0.380 inches maximum

• Thread Pitch Diameters

  0.3503 to 0.3537 inches

• Inclosure Protection Type For Which Designed

  humidity resistant and shockproof and vibrationproof

• Switch Current Rating And Type In Amps

  0.5 ac and 0.5 dc

• Terminal Type And Quantity

  6 tab w/screw