87120-39

Technical Characteristics

• Nonderated Continuous Voltage Rating And Type Per Section

  100.0 dc all sections

• Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

  -30.0/+30.0 all sections

• Case Material

  plastic

• Terminal Diameter

  0.016 inches minimum and 0.020 inches maximum

• Power Factor At Reference Temp In Percent

  1000.000

• Section Quantity

  8

• Terminal Surface Treatment

  solder

• Reliability Indicator

  not established

• Body Style

  single inline

• Dissipation Factor At Reference Temp In Percent

  0.100

• Overall Height (Non-Core)

  0.415 inches maximum

• Nonderated Operating Temp

  -55.0 deg celsius minimum and 125.0 deg celsius maximum

• Test Data Document

  14933-87120-39 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Body Width

  0.135 inches maximum

• Insulation Resistance At Reference Temp

  100000.0 megohms

• Body Height

  0.300 inches maximum

• Body Length

  1.000 inches maximum

• Schematic Diagram Designator

  series connected, end terminal grounded to case

• Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

  0.0 all sections

• Center To Center Distance Between Terminals Parallel To Length

  0.890 inches minimum and 0.910 inches maximum

• Terminal Type And Quantity

  10 pin

• Overall Width (Non-Core)

  0.135 inches maximum

• Terminal Length

  0.115 inches minimum

• Overall Length (Non-Core)

  1.000 inches maximum

• Tolerance Range Per Section

  -5.00/+5.00 percent all sections

• Capacitance Value Per Section

  390.000 picofarads all sections