717801828-001
Resistors
RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION
717801828-001
RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Pilot Diameter
0.7495 inches minimum and 0.7505 inches maximum
-
Terminal Location
radially positioned over less than half the circumference
-
Maximum Starting Torque
0.50 inch-ounces
-
Maximum Running Torque
0.40 inch-ounces
-
Electrical Resistance Per Section
10.0 percent, rated amperes c and better flooring
-
Mounting Lip Depth
0.0570 nominal mils and 0.0670 nominal centimeters
-
Function Conformity Tolerance Per Section
-0.25/+0.25 single section
-
Features Provided
humidity proof
-
Pilot Length
0.0570 inches minimum and 0.0670 inches maximum
-
Effective Electrical Rotation In Deg Angular Rotation
320.0 nominal
-
Function Characteristic Per Section
7 oclock all primaries
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 single section
-
Undercut Width
0.0570 inches minimum
-
Section Quantity
1
-
Shaft Runout
0.002 inches
-
~1
section and -5.0/+5.0 125 deg celsius single s
-
Resistance Temp Characteristic Range Per Section In Percent
-5.0/+5.0 105 deg celsius single section and -5.0/+5.0 75 deg celsius single section and -2.5/+2.5 50 deg celsius single section and -2.5/+2.5 0 deg celsius single section and -5.0/+5.0 -65 deg celsius single section and -4.0/+4.0 -15 deg celsius single
-
Special Test Features
resistors supplied are intended for use in flight hardware
-
Fragility Factor
moderately rugged
-
Terminal Type And Quantity
3 turret
-
Shaft End Play
0.005 inches
-
Cubic Measure
0.522 cubic inches
-
Shaft Style
round, slotted
-
Function Conformity Per Section
single section independent linearity
-
Shaft Bearing Type
sleeve
-
Mechanical Backlash In Deg Angular Rotation
0.1
-
Body Diameter
0.906 nominal centimeters
-
Undercut Diameter
0.781 inches maximum
-
Shaft Length
0.594 inches minimum and 0.656 inches maximum
-
Mounting Method
clamp
-
Mounting Lip Diameter
0.8650 inches minimum and 0.8800 inches maximum
-
Pilot Diameter Runout
0.001 inches
-
Resistance Tolerance Per Section In Percent
-5.0/+5.0 single section
-
Shaft Radial Play
0.001 inches
-
Body Style
cylindrical servo mounted
-
End Item Identification
lantirnnavpod
-
Departure From Cited Designator
clamp rings are not acceptable
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section
-
Rotary Actuator Travel In Angular Deg
360.0 nominal
-
Lateral Runout
0.002 inches
-
Shaft Diameter
0.1245 inches minimum and 0.1255 inches maximum
-
Body Length
0.810 inches maximum
-
Actuator Type
single shaft
-
Reliability Indicator
not established
-
Test Data Document
04939-717801828 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
-
Power Dissipation Rating Per Section In Watts
1.0 7th secondary quality
-
Actuator Travel Control Feature
continuous motion