WRS1G040S103B

Technical Characteristics

• ~1

  section

• End Item Identification

  5895-01-166-6949 display board,combat information central

• Switch Current Type And Rating In Amps

  1.000 ac

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Body Length

  0.812 inches maximum

• Terminal Location

  rear-bottom

• Effective Electrical Rotation In Deg Angular Rotation

  292.0 minimum and 298.0 maximum

• Shaft Diameter

  0.124 inches minimum and 0.126 inches maximum

• Body Style

  cylindrical bushing mounted

• Resistance Temp Characteristic Range Per Section In Percent

  +0.0/+2.0 0 deg celsius single section and -3.0/+3.0 105 deg celsius single section and +0.0/+4.0 -40 deg celsius single section and -2.5/+2.5 85 deg celsius single section and +0.0/+5.0 -55 deg celsius single section and -4.0/+4.0 120 deg celsius single

• Cubic Measure

  0.159 cubic inches

• Standard Taper Curve Per Section

  a single section

• Switch Contact Arrangement

  single pole, single throw, normally open, both positions maintained

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Maximum Stop Torque

  32.00 inch-ounces

• Test Data Document

  37695-228092 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Rotary Actuator Travel In Angular Deg

  255.0 minimum and 265.0 maximum

• Screw Thread Diameter

  0.250 inches nominal

• Switch Voltage Rating In Volts

  125.0

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1

• Nonturn Device Location

  at 10'30 oclock

• Screw Thread Quantity Per Inch

  32.0

• Shaft Style

  round, slotted

• Electrical Resistance Per Section

  10.0 kilohms single section

• Nonturn Device Radius

  0.245 inches nominal

• Switch Type

  rotary

• Power Dissipation Rating Per Section In Watts

  0.5 free air single section

• Special Features

  terminal lugs exiting the side of the part body rather than the end

• Shaft Bearing Type

  sleeve

• Maximum Running Torque

  13.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 single section

• Maximum Starting Torque

  13.00 inch-ounces

• Body Diameter

  0.500 inches nominal

• Shaft Length

  0.625 inches nominal

• Terminal Type And Quantity

  5 tab, solder lug

• Features Provided

  panel seal and switch

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Switch Operating Position

  start of rotation

• Mounting Bushing Length

  0.250 inches nominal

• Mounting Method

  standard bushing