5908337

Technical Characteristics

• Reliability Indicator

  not established

• Mounting Method

  terminal single group

• Winding Operating Current

  300.0 milliamperes nominal b and better drop siding single component single primary

• Dc Resistance Rating In Ohms

  3.600 single component single secondary

• Maximum Operating Temp

  130.0 deg celsius

• Inductance Rating

  5.00 microhenries maximum single component single primary

• Winding Operating Voltage

  26.00 ac pounds per hour wet single component single secondary

• Dc Resistance Rating In Ohms

  1.500 single component single primary

• Terminal Type And Quantity

  5 pin

• Winding Shielding Method

  internal shield connected to secondary terminal single component

• Winding Tap Location (Non-Core)

  center tap single component single secondary

• Center To Center Distance Between Mounting Facilities Parallel To Width

  0.470 inches minimum single mounting facility single center group and 0.530 inches maximum single mounting facility single center group

• Overall Length

  0.815 inches maximum

• Overall Width

  0.700 inches maximum

• Body Height

  0.400 inches maximum

• Frequency Rating

  40.0 kilohertz nominal single component

• Inclosure Type

  fully inclosed

• Winding Function And Quantity

  1 primary single component and 1 secondary single component

• Hazardous Locations/Environmental Protection

  moisture resistant and vibration resistant

• Winding Operating Voltage

  10.00 ac pounds per hour with retaining chain single component single primary

• Center To Center Distance Between Mounting Facilities Parallel To Length

  0.585 inches minimum single mounting facility single center group and 0.615 inches maximum single mounting facility single center group

• Unpackaged Unit Weight (Non-Core)

  15.0 grams

• Test Data Document

  99167-5908337 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)