30M523

Technical Characteristics

• Standard Taper Curve Per Section

  a 4th section

• Rotary Actuator Travel In Angular Deg

  295.0 minimum and 305.0 maximum

• Nonturn Device Location

  at 9 oclock

• Mounting Method

  standard bushing

• First Flat Length

  0.234 inches minimum and 0.266 inches maximum

• Screw Thread Diameter

  0.359 inches minimum and 0.391 inches maximum

• Standard Taper Curve Per Section

  c 1st section

• Flat Height

  0.092 inches minimum and 0.096 inches maximum

• Features Provided

  humidity proof

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better industrial clears

• Effective Electrical Rotation In Deg Angular Rotation

  260.0 nominal

• Power Dissipation Rating Per Section In Watts

  1.0 free air all sections

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better finish

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better select

• Standard Taper Curve Per Section

  c 2nd section

• Standard Taper Curve Per Section

  c 3rd section

• Body Style

  rectangular bushing mounted

• Screw Thread Quantity Per Inch

  32.0

• Maximum Running Torque

  10.00 inch-ounces

• Nonturn Device Radius

  0.289 inches minimum and 0.321 inches maximum

• Shaft Bearing Type

  sleeve

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 4th section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 all sections

• Electrical Resistance Per Section

  500.0 ohms c and better v.g. stepping

• Terminal Location

  lower adjacent side two rows

• Maximum Stop Torque

  64.00 inch-ounces

• Body Height

  0.609 inches minimum and 0.641 inches maximum

• Mounting Bushing Length

  0.359 inches minimum and 0.391 inches maximum

• Body Length

  1.671 inches minimum and 1.765 inches maximum

• Body Width

  0.609 inches minimum and 0.641 inches maximum

• Shaft Length

  0.734 inches minimum and 0.766 inches maximum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -100.0/+100.0 all sections

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 2nd section

• Screw Thread Series Designator

  unef

• Shaft Style

  round, flatted

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 3rd section

• Terminal Type And Quantity

  12 tab, solder lug

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Shaft Diameter

  0.124 inches minimum and 0.126 inches maximum

• Maximum Starting Torque

  10.00 inch-ounces

• Section Quantity

  4

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 1st section